Shop
Filter Close
View as

Showing 49–60 of 304 results

Page
5
/ 26
  • Quick view
    Add to cart Add to wishlist Add to compare

    Dual port RS232 to RS422/485 Optical Isolated Converter

    Rated 0 out of 5
    $277.20
    Features
    • Wide range input DC power supply.
    • Automatic data format configuration.
    • Auto direction flow control on RS-485.
    • Auto baud rate switching from 300bps to 115.2Kbps.
    • 3000V DC isolated protection.
    • Surge protection on RS-422/485 data lines.
    • Power/TX/RX mode LED indicator.
    • Support screw terminal and external DC adaptor.
    • DIN rail or panel mounts support.
    Specifications
    • Power input voltage: DC +10V to +30V.
    • Host connection: 2 standard D-Sub 9 pin female connectors.
    • RS-232 interface: Standard D-Sub 9 pin female connector.
    • RS-232 signal: TXD, RXD, GND.
    • RS-422/485 interface: Industrial plug-in screw terminal.
    • RS-485 signal: Differential 2 half-duplex wires (D+, D-).
    • RS-422 signal: Differential 4 full-duplex wires. (TX+, RX+, TX-, RX-) .
    • Communication speed: Form 300bps to 115.2Kbps auto detecting.
    • RS422/485 line protection: Against surge, short circuit, voltage peak.
    • Distance: Up to 4000ft (1200M).
    • Isolation voltage: 3000V DC.
    • Plug-in screw terminal wiring: Accepts AWG #12 ~ 30 wires.
    • Signal LED: Power on, TXA, RXA, TXB, RXB.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption: 1.3W.
    • Operating environment:-10 to 50℃ .
    • Storage temperature: -20 to 70℃ .
    • Humidity: 10-90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 375g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    RS232 to RS422/485 Optical Isolated Converter

    Rated 0 out of 5
    $190.08
    Features:
    • Wide range input DC power supply.
    • Automatic data format configuration.
    • Auto direction flow control on RS-485.
    • Auto baud rate switching from 300bps to 115.2Kbps.
    • 3000V DC isolated protection.
    • Surge protection on RS-422/485 data lines.
    • Power/TX/RX mode LED indicator.
    • Support screw terminal and external DC power adaptor.
    • Din rail or panel mounts support.
    Specifications:
    • Power input voltage: DC +10V to +30V.
    • Host connection: Standard D-Sub 9 pin female connectors.
    • RS-232 interface: Standard D-Sub 9 pin female connector
    • RS-232 signal: TXD, RXD, and GND.
    • RS-422/485 interface: Industrial plug-in screw terminal.
    • RS-485 signal: differential 2 half-duplex wires (DATA+, DATA-).
    • RS-422 signal: differential 4 full-duplex wires. (TX+, RX+, TX- , RX-)
    • Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.
    • Transmission distance: RS-422/485 up to 4000ft (1200M).
    • Communication speed: from 300bps to 115.2Kbps.
    • Isolation voltage: 3000V DC.
    • Serial data format: Asynchronous data with all common combination of bits, parity, stop.
    • Signal LED: Power on, TX, and RX.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption: 1.2 watt.
    • Operating Temperature：-10 to 50℃ .
    • Storage Temperature: -20 to 70℃.
    • Humidity: 10-90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm
    • Weight: 375g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    IS1A45P18-0

    Rated 0 out of 5
    $522.72
    The inclination sensor IS1A45P18-0 serves, according to the model, for one-channel measurement of inclinations in the ranges ±45°. The inclination sensor IS2A xx P18 includes one channel. The full-scale readings are calibrated factory-made at 25°C. Applications:
    • Industry automation
    • Agricultural and forestry machines
    • Utility vehicles
    • Crane and hoisting technology
  • Quick view
    Add to cart Add to wishlist Add to compare

    Contactless reader CANCrocodile

    Rated 0 out of 5
    $147.84
    CANCrocodile is designed for safe data reading from vehicle CAN bus. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from CANbus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection and without damaging CAN wires. CANCrocodile works in “listen” mode only, i.e. it does not change original J1939 messages and does not send any signals to CANbus.
    • Compatible for SAE J1939, CAN Open, DeviceNet, NMEA 2000
    • Nominal supply voltage: 12/24 V   (5V – on request ; 2/24 A++ (low current consumption) – on request)
    • Current consumption: 300mA for “5V” version; 30/15mA for “12/24V” version; 10/5mA for “12/24 A++” version
    • Cable length- 0.7m  (2 m– on request)
    • Cable connector- Molex/bare wires/Special connector (specify when ordering)
  • Quick view
    Add to cart Add to wishlist Add to compare

    M01-CAN Pressure Sensor, 400 bar, G1/4″ , SAE J1939 DT04 4-pole

    Rated 0 out of 5
    $395.00
    M01-CAN Pressure Sensor, 400 bar, G 1/4", J1939, DT04- 4p The pressure transmitter M01-CAN has been especially designed for applications in mobile machines. The EMC characteristics as well as the shock and vibration resistance are selected especially for this area of applications. This facilitates applications in challenging ambient conditions, such as in the field of mobile hydraulics.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Anybus Communicator CAN Modbus RTU

    Rated 0 out of 5
    $1,074.00
    The chosen interfaces within this Anybus gateway are:
    • CAN-based
    • Modbus RTU Slave
    Integrate your CAN-based industrial devices and equipment to a Modbus RTU control system without the need for any changes to the device. Just connect, configure and you're done
  • Quick view
    Add to cart Add to wishlist Add to compare

    Temperature Sensor T01 , -40C to 150C, CANOpen, DT04

    Rated 0 out of 5
    $394.00
    Part no: T01-C-08-01-09
    System Data
    System connection G 1/4″ acc. DIN 3852 Part 11, others available on request
    Measurement Range -40 to +150°C
    Electrical Connection DT04 (4 pole)
    In-/Outputs
    Outputs SAE J1939, CANopen
    Environmental Requirements
    Media temperature -40…+150°C
    Application range Process engineering, aggressive media, extended temperature range, mobile hydraulics
  • Quick view
    Add to cart Add to wishlist Add to compare

    Temperature Sensor T01 , -40C to 150C, CANOpen, M12

    Rated 0 out of 5
    $539.00
    Part no: T01-C-08-01-01
    System Data
    System connection G 1/4″
    Measurement Range -40 to +150°C
    Electrical Connection M12 (plastic)
    In-/Outputs
    Outputs SAE J1939, CANopen
    Environmental Requirements
    Media temperature -40…+150°C
    Application range Process engineering, aggressive media, extended temperature range, mobile hydraulics
  • Quick view
    Add to cart Add to wishlist Add to compare

    Industrial Raspberry Pi IoT Gateway “netPI RTE 3”

    Rated 0 out of 5
    $790.84
    • Raspberry Pi 3 architecture compatible custom design
    • Docker as basis to deploy containerized applications securely
    • For Industrial Ethernet networks PROFINET, EtherNet/IP, EtherCAT as slave
    • Cyber secured software infrastructure for industrial use
    • Expansion slot for additional communication modules
  • Quick view
    Add to cart Add to wishlist Add to compare

    TC1 Mobile 76259 Telematics Module 2G/3G, GPS, RS232, ETH, 2xCAN, RTC

    Rated 0 out of 5
    $1,650.00
    • Embedded Linux for fast and easy development of applications
    • WiFi, Bluetooth, cellular communication and GNSS functionality
    • Compatible with STWs cloud solutions and all other common cloud platforms
    • CAN and Ethernet interface for monitoring machine data
    • Compliance with standards for the automotive, agricultural and construction machinery industries
    • Cost-effective integration through different variants
    • Possess connections for external antennas
  • Quick view
    Add to cart Add to wishlist Add to compare

    TC3G 72523 Telematics Module 2G/3G, GPS, WLAN, RS232, ETH, 2xCAN, USB

    Rated 0 out of 5
    $1,995.00
    • 3G (five bands) and 2G (four bands) wireless communication
    • Wireless interfaces such as WLAN and Bluetooth
    • CDMA option for cellular
    • GPS and GLONASS receiver for optimized accuracy and acquisition time.
    • Internal or external Antennas
    • 2 CAN, one RS-232 port, one Ethernet and one USB interfaces
    • 32 bit MPC5200B  400-MHz micro-controller
    • Board Support Package with CAN recorder and virtual CAN network software.
    • Linux Operating System
    • Communications expansion board adds a digital input and output, an accelerometer, and the option to add cellular (GSM/CDMA/3G), GPS and WLAN modems
  • Quick view
    Add to cart Add to wishlist Add to compare

    ESX-MICRO 56521 Programmable Controller 2xPWM, 4xAIN, 1MB Flash ,2xCAN, 1xRS232

    Rated 0 out of 5
    $734.00
    ESX-MICRO
    • 16 bit controller with 1MB Flash
    • 2xCAN channels, 1xRS232
    • Maximum 10 I/O
    • 2xPWM/Digital outputs
    • 4xCurrent inputs