Cart (1)
Close
-
CAN-CR200
Qty: 1 $511.50
Subtotal: $511.50
-
iPC-I 165/ISA
$1,320.00iPC-I 165, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPCI 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller. -
iPC-I 320/PCI II
$1,100.00iPC-I 320/104; one CAN channel with galvanic isolation This active CAN board with one por two CAN channels is appropriate for use in a wide variety of CAN applications. Filtering, pre-processing, transmission and time stamped storage of the CAN messages are just some of the features offered by the on-board micro-controller. In combination with the universal CAN driver (VCI), the iPC-I 320/PCI II allows an easy integration of PC supported CAN applications. Offering an exceptional combination of functionality and value, it is perfectly suited for high-volume productions. In addition, the iPC-I 320/PCI II is also well-suited for use with the IXXAT analysis and configuration tools. -
CANbus Termination Resistor M12 x5 Pin Male
$48.84Terminating Resistor 120 Ohm, M12 X5P Male. Suitable for CAN Open (encoders and other devices with M12) -
IS2TK090-O-RL
$1,704.55The 2-dimensional inclination sensor IS2TK090-O-RL is suitable to measure the inclination in 2 dimensions (X/Y) in a range of ±90°. To ensure a high accuracy, the sensor is calibrated at the factory. The compact and robust design makes the sensor a suitable angle measurement device in rough surroundings for different applications in industry and mobile technology. A simple setting of all parameters which are stored in the internal permanent memory is possible via CANopen interface. The sensors of the referenceLine (rL) impress with a very small temperature coefficient (typ. ±0.0008 °/K), which is up to 10 times smaller than with comparable inclination sensors, such as the classicLine (cL). This minimizes the influence of temperature changes on the sensor signal (typically < ±0.10° above -40 °C… +80 °C) and enables even more precise measurements. This product will take upto 5 weeks for delivery. -
IS1TK360-O-RL
$2,045.46The 1-dimensional inclination sensor IS1TK360-O-RL is suitable to measure the inclination in the range of 360°. To ensure a high accuracy, the sensor is calibrated at the factory. The compact and robust design makes the sensor a suitable angle measurement device in rough surroundings for different applications in industry and mobile technology. A simple setting of all parameters which are stored in the internal permanent memory is possible via CANopen interface. The sensors of the referenceLine (rL) impress with a very small temperature coefficient (typ. ±0.0008 °/K), which is up to 10 times smaller than with comparable inclination sensors, such as the classicLine (cL). This minimizes the influence of temperature changes on the sensor signal (typically < ±0.10° above -40 °C… +80 °C) and enables even more precise measurements. This product will take upto 5 weeks for delivery. -
IS2BP090-O-CL
$626.06The 2-dimensional inclination sensor IS2BP090-O-CL is suitable to measure the inclination in 2 dimensions (X/Y) in the measurement range of ±90°. To ensure a high accuracy, the sensor is calibrated at the factory. The compact and robust design makes the sensor a suitable angle measurement device in rough surroundings for different applications in industry and mobile technology. A simple setting of all parameters which are stored in the internal permanent memory is possible via CANopen interface. This product will take upto 5 weeks for delivery. -
IS1BP360-O-CL
$626.06The 1-dimensional inclination sensor IS1BP360-O-CL is suitable to measure the inclination in the measurement range of 360°. To ensure a high accuracy, the sensor is calibrated at the factory. The compact and robust design makes the sensor a suitable angle measurement device in rough surroundings for different applications in industry and mobile technology. A simple setting of all parameters which are stored in the internal permanent memory is possible via GEMAC interface. This product will take upto 5 weeks for delivery. -
CAN@net II/Generic
$928.40CAN-Ethernet gateway and CAN-Ethernet-CAN bridge The CAN@net II/Generic enables easy and flexible access to CAN systems via Ethernet. The device provides two operation modes, a bridge mode and a gateway mode. Features and Benefits- Bridging of large distances and easy system access using Ethernet
- Filter and conversion functionality
- Cost savings due to simple wiring
-
CAN-CR210/FO
$0.00CAN-CR210/FO Glass Fiber Version with ST Connector [Extended Temp. Range] Stackable converter from ISO 11898-2 to fiber optic cable The CAN-CR210/FO is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection against EM-influences. For creating star or tree topologies, several CAN-CR210/FO can be connected to a CAN-hub via the integrated backbone bus (also in conjunction with CAN-CR200). One special feature of the repeater is, that it separates a defective segment from the rest of the network, so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again. -
CAN-CR200
$511.50CAN-CR200 Modular ISO 11898-2 CAN repeater with backbone bus The CAN-CR200 is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. Several CAN-CR200 can be connected to a CAN-hub via the integrated backbone bus. One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again. The galvanic isolation isolates the CAN segments from each other as well as from the power supply.
