TryCom – canconnect

View cart “Fiber to RS232/422/485 Isolated Converter, ST/2KM” has been added to your cart.

View as

Showing 1–12 of 24 results

Page

1

/ 2

Add to cart Add to wishlist Add to compare

Isolated 8 CH. Analog Input Modbus TCP Module

Rated 0 out of 5

$586.08

Features
Wide input range DC power supply. Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol. 16 TCP Port can be open at the same time. Heart Beat function ensures a reliable communicating connection. Maximum 8 sets host IP that limits network access. Support Virtual-COM mode. The web-based can be directly read analog value status. It is easy to update the firmware by LAN interface. Back to factory configuration by external touch button. Auto reconnection when power or Ethernet fail. Digital input signal from +/- 0 to 30V DC. Built-in surge absorbers in each relay N.C and N.O. Built-In watchdog function prevents system boot fail. LED for each I/O channels working status. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Power/Link LED indicator. DIN-Rail and panel mount support. Dual power input selects from screw terminal or DC-Jack.
Specifications
Resolution: 16 bit/24bit. Sample rate: 24 BIT Normal mode: 10 sample / sec. 16 BIT Fast Mode: 60 sample / sec. Bandwidth: Normal Mode: 15.72Hz. Fast Mode:/78.72Hz. Zero drift: 0.03uV/C . Span drift: 25 ppm/C. Accuracy: Normal 0.1 or better. Fast: 0.5 or better. Analog Input range: Voltage:±10V,±5V,±2.5V,±1.25V,±650mV. Current: +/-20mA. CMRR:92 db min/50/60Hz Analog input over voltage protection: +/- 48V. Power Input Voltage DC +10V to +30V. Protocol: TRP-ASCII and Modbus RTU/ASCII. Input channel:8-ch analog Input differential Input optical isolation: 3750 Vrms. Communication interface: Ethernet RJ45. Configuration mode: Device Manager, WEB settings. Heart Beat: TCP Port sent string every 5 seconds. TCP Maximum Connection:1~16. Module ID: 1~255. Connection type: Screw terminal for maximum AWG 12 wire. Power supply: Screw terminal, or external DC adapter. Power consumption 320mA/12V. Operating environment: 0 to 50℃. Storage temperature: -10 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm. Weight: 395g.

Add to cart Add to wishlist Add to compare

Isolated 4 channel Digital Input and 4 channel AC Relay Modbus TCP Module

Rated 0 out of 5

$455.40

Features
Wide input range DC power supply. Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol. 16 TCP Port can be open at the same time. Heart Beat function ensures a reliable communicating connection. Maximum 8 sets host IP that limits network access. Support Virtual-COM mode. WEB PAGE can be directly read IO status. Easily update the firmware using the Internet. Back to factory configuration by external touch Button. Auto reconnection when power or Ethernet fail. Digital input signal from +/- 0 to 30V DC. Built-in surge absorber in each relay N.C and N.O. Built-In watchdog function prevents system boot fail. LED for each I/O channels working status. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Power/Link/8 CH D I/O LED indicator. DIN-Rail and panel mount support. Dual power input select from screw terminal or DC-Jack..
Specifications
Power Input Voltage DC +10V to +30V. Protocol: TRP-ASCII and Modbus RTU/ASCII. Input channel: 16 digital input channels with counter. Input digital input counter: 0~65535. Input optical isolation: 3750 Vrms. Input logical level 0 +1V (max). Input logical level 1 +4.0V ~ +30V. Output channel: 4 channel power reply outputs. Relay type: 2 Form A (RL1,RL2) , 2 Form C (RL3,RL4). Contact ratting: 5A /30V DC , 5A /120V AC , 5A /250V AC. Relay surge strength: 4000V. Relay operating time: 3mS. Relay operating life: 2 X 10(7). Communication interface: Ethernet RJ45. Configuration mode: Trycom Device Manager, WEB settings. Matching remote control: with another TRP-C28H. Heart Beat: TCP Port sent string every 5 seconds. TCP Maximum Connection:1~16. Module ID :1~255. Connection type: Screw terminal for maximum AWG 12 wire. Power supply: Screw terminal, or external DC adapter. Power consumption 320mA/12V. Operating environment: 0 to 50℃. Storage temperature:. -10 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 395g .

Add to cart Add to wishlist Add to compare

Isolated 16 CH. Digital Input with Counter Modbus TCP Module

Rated 0 out of 5

$455.40

Features
Wide input range DC power supply. Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol. 16 TCP Port can be open at the same time. Heart Beat function ensures a reliable communicating connection. Maximum 8 sets host IP that limits network access. Support Virtual-COM mode. WEB PAGE can be directly read IO status. Easily update the firmware using the Internet. Back to factory configuration by external touch Button. Auto reconnection when power or Ethernet fail. Digital input signal from +/- 0 to 30V DC. Built-In watchdog function prevents system boot fail. LED for each I/O channels working status. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Power/Link/16 CH DI LED indicator. DIN-Rail and panel mount support. Dual power input select from screw terminal or DC-Jack.
Specifications
Power Input Voltage DC +10V to +30V. Protocol: TRP-ASCII and Modbus RTU/ASCII. Input channel: 16 digital input channels with counter. Input digital input counter: 0~65535. Input optical isolation: 3750 Vrms. Input logical level 0 +1V (max). Input logical level 1 +4.0V ~ +30V. Communication interface: Ethernet RJ45. Configuration mode: Trycom Device Manager, WEB settings. Matching remote control: with TRP-C24H. Heart Beat: TCP Port sent string every 5 seconds. TCP Maximum Connection:1~16. Module ID :1~255. Connection type: Screw terminal for maximum AWG 12 wire. Power supply: Screw terminal, or external DC adapter. Power consumption 240mA/12V. Operating environment: 0 to 50℃. Storage temperature:. -10 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 395g.

Add to cart Add to wishlist Add to compare

Isolated 16 CH. Open Control Modbus TCP Module

Rated 0 out of 5

$435.60

Features
Wide input range DC power supply. Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol. 16 TCP Port can be open at the same time. Heart Beat function ensures a reliable communicating connection. Maximum 8 sets host IP that limits network access. Each channel supports the mono stable circuit and auto save the time period to EEPROM. Support Virtual-COM mode. IO status can be set in the boot! WEB PAGE can be directly output and read IO status. Easily update the firmware using the Internet. Back to factory configuration by external touch button. Auto reconnection when power or Ethernet fail. Digital output signal with 3750Vrms isolation protection. Built-In watchdog function prevents system boot fail. LED for each I/O channels working status. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Power/Link/16 CH DO LED indicator. DIN-Rail and panel mount support. Dual power input select from screw terminal or DC-Jack.
Specifications
Power Input Voltage DC +10V to +30V. Protocol: TRP-ASCII and Modbus RTU/ASCII. Digital output maximum voltage:+30V. Digital output maximum current: 100mA. Digital output isolation: 3750Vrms. Pulse timer:1~65535 (100ms/unit). Communication interface: Ethernet RJ45. Configuration mode: Trycom Device Manager, WEB settings. Matching remote control: with TRP-C26H. Heart Beat: TCP Port sent string every 5 seconds. TCP Maximum Connection:1~16. Module ID :1~255. Connection type: Screw terminal for maximum AWG 12 wire. Power supply: Screw terminal, or external DC adapter. Power consumption 240mA/12V. Operating environment: 0 to 50℃. Storage temperature:. -10 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 395g .

Add to cart Add to wishlist Add to compare

Bluetooth to RS232/422/485 Converter

Rated 0 out of 5

$475.20

Features
Bluetooth V1.2 Class 1 compliance. (2.5mW/4dBm) Transmission range open filed over to 100M. Auto reconnect when the external power lost. Auto clear serial buffer when the data continuity input when re-boot. Auto directionally RS485 signal communication. Option to 1KM when replace the direction antenna. Support all common baud rate from 1.2K to 256Kbps. Friendly interface TRP-BT configuration windows utility RS422 and RS485 signal auto switching. LED indicators for Power/Link/TX/RX. Surge protection on RS422/RS485. Power supply: Screw terminal, or external DC adapter. Wide input range power supply. DIN rail and panel mount support.
Specifications
Power requirement: DC voltage input from +10V to +30V. RS232 signal: TXD, RXD, GND, RTS, CTS. RS422/485 connection: industrial plug-in screw terminal. RS485 signal: differential 2 half-duplex wires. (D+, D-) RS422 signal: differential 4 full-duplex wires.(TX+, TX-, RX+, RX-) Baud rate: 1.2Kbps to 256Kbps. Data bit: 8 Support Parity check: None, Even, Odd. Stop bit: 1, 2. RS232 flow control RTS/CTS: Enable, Disable. Host PC com port to TRP-C51 connection: use null modem female-female cable. Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires. Wireless transmission distance: Open filed: 100M. Antenna cable length:1530mm. RS422/485 distance: up to 4000ft. (1200M) LED indicator: Power, Link, TX, and RX. Power input type: Screw terminal or DC plug.(5.52.112mm/500mA) Power consumption: 1.2 watt. Operating temperature: -10 to 50℃. Storage temperature: -20 to 65℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm. Weight: 400g.

Add to cart Add to wishlist Add to compare

Ethernet to Fiber Media Converter, SC/20KM

Rated 0 out of 5

$324.72

Features
Wide input range DC power supply. Plug-and-Play design for the installation within seconds. Compact and Rugged Metal case capable of withstanding harsh environment. Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port. Auto MDI-X/MDI-II for 10/100Base-TX port. Provides media conversion from UTP to Fiber Optic media types Supports link fault pass through function. Supports far end fault function. LED display to indicate the whole working status. 3 power input types: Direct USB power, external DC adapter and screw terminal. Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.
Specifications
Cable: Fiber cable (9/125um). One 10/100Base-TX auto-negotiation Ethernet RJ-45 port. One 100Mbps fiber port with Single-mode SC connector. Built in 128Kb RAM for data buffer. Wavelength: 1310 nM. Fiber Power:-15 ~ -8 dBm. LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB. Distance : 20KM can be up to 60KM (option). Speed : Auto 10/100MB. Power Consumption: 12V/160mA. Power requirement: USB port power or DC input or screw terminal from +10 to 30V. Operating temperature: -10 to 50℃. Storage temperature : -20 to 70℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 400g .

Add to cart Add to wishlist Add to compare

Fiber to RS232/422/485 Isolated Converter, SC/40KM

Rated 0 out of 5

$475.20

Feature
Wide input range DC power supply. SC single mode fiber port. Auto direction flow control on RS-485. Auto RS-232/422/485 signals switching. Auto data format detecting. Auto baud rate switching from 300bps to 115.2Kbps. Support 3000V DC isolation protection. Support surge protection on RS-422/485 data lines. Power/TX/RX mode LED indicator. Fiber transmission distance up to 40KM . DIN rail or panel mount support.
Specifications
Power Input Voltage: DC +10V to +30V. Interface: RS-232/422/485 auto switching. RS-232: 3 full-duplex (TXD, RXD, GND). RS-422: Differential 4 full-duplex wires(TX+,TX-,RX+,RX-). RS-485: Differential 2 half-duplex wires(Data+,Data-). Cable: Fiber cable (9/125um). Wavelength: 1310(FPLD) nM. Distance: Fiber up to 40KM and RS-422/485 up to 4000ft (1200M ). RS-422/485 line protection: Against surge, short circuit, voltage peak. Connection type: Screw terminal for maximum AWG #12~30 wires. Power supply: Screw terminal, or external DC adapter. Power consumption: 110mA/12V Isolation Voltage: 3000V DC. Operating environment: -10 to 50℃ . Storage temperature: -20 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 388g .

Add to cart Add to wishlist Add to compare

Fiber to RS232/422/485 Isolated Converter, ST/2KM

Rated 0 out of 5

$396.00

Features
Wide range power input voltage. ST Multi-mode fiber port. Auto direction flow control on RS-485. Automatically switch signal RS-232, RS-422 and RS-485. Support 3000V DC isolation protection. All RS-422/485 signals provide surge and over current protection. Power/TX/RX mode LED indicator. Fiber transmission distance up to 2KM . Auto baud rate switching from 300bps to 115.2Kbps. Support Din-Rail and panel mount.
Specifications
Power Input Voltage: DC +10V to +30V. Interface: RS-232/422/485 auto switching to Fiber (Multi-mode). RS-232: 3 full-duplex (TXD, RXD, GND). RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , and RX-). RS-485: Differential 2 half-duplex wires (D+, D-). Cable: Fiber ST Cable (62.5/125um). Wavelength: 820 nM. Distance: RS-422/485 up to 4000ft . ( 1250M ), and Fiber up to 2 KM . Baud Rate: From 300bps to 115.2kbps (maximum). Operating System: Windows/Linux/Unix/MAC. Connection type: Screw terminal for maximum AWG 12 wire. Signal LED: Power on, TX, RX. Power supply: Screw terminal, or standard external DC adapter. Power consumption: 1.6W. Isolation Voltage: 3000V DC. Operating temperature:-10 to 50℃. Storage temperature: -20 to 70℃. Humidity: 10-90% non-condensing. Dimension: 151 mm X 75mm X 26mm . Weight: 375g .

Add to cart Add to wishlist Add to compare

4 port Modbus TCP to RTU/ASCII Gateway

Rated 0 out of 5

$990.00

Features
Wide input range DC power supply. Provide 3KV optical isolation protection. Supports Ethernet Mode like TCP Server, TCP Client, and UDP. Support Auto-MDIX twisted pair crossover detection and auto-correction. Maximum allowed bandwidth is 460 Kbps per Serial Port. Supports PPPoE , DDNS , NTP , FTP , Telnet. Runs in Stand Alone Mode. Built in Restore Factory default push button. Auto direction RS485 flow control by hardware. Power/Link and 4 pairs serial RX/TX mode LED indicator. Support screw terminal and standard external DC power adaptor. Panel mounts and Din-Rail Support.
Specifications
CPU:32 bit 580MHZ with MMU. Power Input Voltage: DC +9V to +24V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. RS-232: TX, RX, GND. RS-422: TX+, TX-, RX+, RX-. RS-485: Data +, Data –. Data Rate: 75~230.4Kbps. Parity: none, even, odd. Data Bits: 5, 6, 7 or 8. Stop Bits: 1, 2. Configuration through Windows Admin Utility / Web Console / Telnet Console. Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet. Power supply: Screw terminal, or standard external DC adapter. Serial interface: +/-15 KV ESD. RS422/485 interface: Surge, over current, over voltage protection. Serial terminal and Ethernet with 3KV Optical Isolation. Power consumption: 12V/400 mA . Operating Temperature: -20 °C to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 224(L)107(W)33(H) /mm. Weight: 400g (W/Packing).

Add to cart Add to wishlist Add to compare

4 port RS232/422/485 Serial Device Server

Rated 0 out of 5

$724.68

Features
Wide input range DC power supply. Supports Socket operation modes like TCP Server, TCP Client, and UDP using TCP/IP and UDP protocols. Support Auto-MDIX twisted pair crossover detection and auto-correction. Each Port maximum connection 4 host PC at TCP Server and TCP Client Mode. Maximum allowed bandwidth is 230.4 Kbps per Serial Port. Supports Web Console, Telnet Console. Runs in Stand Alone Mode. Built in Restore Factory default push button. Features Accessible Imps List to add or remove “legal” remote host IP Addresses to prevent unauthorized access to Serial Server. Features Auto IP Address Report to periodically report the IP Address of Serial Server to the assigned Host on Network. Auto direction RS485 flow control by hardware. Surge protection and over current and over voltage on RS-422/485 data lines. Virtual COM drivers for WIN 32bit XP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS, Win 7 (32-bit & 64-bit) ,Win 8/8.1 (32-bit & 64-bit). Fully compatible with Ethernet and TCP/IP protocol. Supports 10/100 Mbps Ethernet. Power/Link and 4 pair Serial RX/TX mode LED indicator. Support screw terminal and standard external DC power adaptor. Panel mounts and Din-Rail support.
Specifications
CPU:32 bit 580MHZ with MMU. Power Input Voltage: DC +9V to +24V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. RS-232: TX, RX, GND. RS-422: TX+, TX-, RX+, RX-. RS-485: Data +, Data –. Data Rate: 75~230.4Kbps. Parity: none, even, odd. Data Bits: 5, 6, 7 or 8. Stop Bits: 1, 2. Configuration through Windows Admin Utility / Web Console / Telnet Console. Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet. Power supply: Screw terminal, or standard external DC adapter. Serial interface: +/-15 KV ESD. RS422/485 interface: Surge, over current, over voltage protection. Serial terminal and Ethernet with 3KV Optical Isolation. Power consumption: 12V/400 mA . Operating Temperature: -20 °C to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 224(L)107(W)33(H) /mm. Weight: 400g (W/Packing).

Add to cart Add to wishlist Add to compare

Modbus TCP to RTU/ASCII Gateway with Watchdog

Rated 0 out of 5

$534.60

Features
Wide input range DC power supply. Built-In watchdog function prevents system boot fail. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Modbus Type support TCP Master to Serial Slave and TCP Slave to Serial Master. Support 1 serial master to 8 TCP slave ,each TCP slave can free set up UID from 0~256.. Compatible with Modscan32 ,Modbus Poll,CAS Modbus Scanner and SCADA .. application. Support virtual com maximum connection 16 client. Maximum 8 sets host IP that limits network access. Surge protection and over current and over voltage on RS-422/485 data lines. Support baud rate from1200~921600Kbps. Auto switching RS-232/422/485 signal interface. Fully compatible with Ethernet and TCP/IP protocol. Supports 10/100 Mbps Ethernet. Power/Link/UART RX/UART TX mode LED indicator. Heart Beat function ensures a reliable communicating connection. Auto reconnection when power or Ethernet fail. Back to factory configuration by external switch. Support configuration by serial console. Update the firmware from LAN. Dual power input select from screw terminal or DC-Jack.
Specifications
Power Input Voltage: DC +10V to +30V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. Modbus TCP Type: TCP Master and slave. Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN 8/WIN 8.1 and WIN10. External touch button: Back to factory. . Power supply: Screw terminal, or DC jack. Configuration mode: Trycom Device Manager, WEB settings. Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires. Power consumption: 12V/140mA. Operating Temperature: -10 to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 151(L)75(W)26(H) mm. Weight: 395g with packing.

Add to cart Add to wishlist Add to compare

RS232/422/485 Serial Device Server with Watchdog

Rated 0 out of 5

$297.00

Features
Wide input range DC power supply. Power Input detection circuit. External watchdog function prevents system or power fail. Support Auto-MDIX twisted pair crossover detection and Auto-Correction. Maximum Connection 16 Client PC at Server Mode. Maximum 8 sets host IP that limits network access. Surge protection and over current and over voltage on RS-422/485 data lines. Support baud rate from1200~921600Kbps. Auto switching RS-232/422/485 signal interface. Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN8/WIN8.1 and WIN10. Virtual Com Support Server, Client, UDP mode. Fully compatible with Ethernet and TCP/IP protocol. Supports 10/100 Mbps Ethernet. Power/Link/RX/TX mode LED indicator. Heart Beat function ensures a reliable communicating connection. Auto Pair-mode when power or Ethernet fails. Back to factory by external switch. Support configuration by serial console. Update the firmware from Lan. Dual power input select from screw terminal or DC-jack.
Specifications
Power Input Voltage: DC +10V to +30V. LAN: Auto-MDIX, 10/100 Mbps Auto-detecting. RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND. RS485 signal: differential 2 half-duplex wires (DATA+, DATA-). RS422 signal: differential 4 full-duplex wires.(TX+,RX+,TX-,RX-) Data Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps . Parity: none, even, odd. Data Bits: 5, 6, 7 or 8. Stop Bits: 1, 1.5 or 2. Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP External switch 1,2:OFF/OFF :TCP and VSP mode. ON/ OFF : Option . OFF/ON :Option. ON/ON :Back to Factory. Virtual-Com mode support RS232 TXD,RXD,GND, RS422 TX+,TX-,RX+, RX-RS485 DATA+,DATA-. Power supply: Screw terminal or DC jack . Serial interface: +/-15 KV ESD. RS422/485 interface: Surge, over current, over voltage protection. Power consumption: 12V/140mA. Operating Temperature:-10 to 65 °C. Humidity: 0~90% Non-Condensing. Dimensions: 151(L)75(W)26(H) mm. Weight: 395g with packing.