Cart (1)
Close
-
CAN@net NT 420 – CAN Ethernet Gateway
Qty: 1 $1,438.80
Subtotal: $1,438.80
-
Anybus Communicator CAN Modbus RTU
$1,074.00The chosen interfaces within this Anybus gateway are:- CAN-based
- Modbus RTU Slave
-
Y CAN Cable 0.25 m Sub D9 (2 x Sub D9 female, 1x Sub D9 male)
$79.20Y CAN cable all pins connected length 25 cm, SUB -D9 socket to sub D9 socket and plug with shield. (similar to IXXAT Y CAN cable 1.04.0076.00001) -
Kvaser BlackBird v2
$2,118.60Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. To learn more about the product check the youtube link. -
iPC-I 165/ISA
$1,320.00iPC-I 165, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPCI 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller. -
iPC-I 320/PCI II
$1,100.00iPC-I 320/104; one CAN channel with galvanic isolation This active CAN board with one por two CAN channels is appropriate for use in a wide variety of CAN applications. Filtering, pre-processing, transmission and time stamped storage of the CAN messages are just some of the features offered by the on-board micro-controller. In combination with the universal CAN driver (VCI), the iPC-I 320/PCI II allows an easy integration of PC supported CAN applications. Offering an exceptional combination of functionality and value, it is perfectly suited for high-volume productions. In addition, the iPC-I 320/PCI II is also well-suited for use with the IXXAT analysis and configuration tools. -
CAN@net NT 420 – CAN Ethernet Gateway
$1,438.80IXXAT CAN@net NT 420 is a CAN-Ethernet gateway, bridge and PC interface with Up to 4 x CAN of which 2 x CAN FD CAN@net NT 420 offer three operation modes and can be used as a PC interface as bridge and gateway. This product may take upto 2 to 3 weeks for delivery. -
CAN@net NT 200 – CAN Ethernet Gateway
$963.60IXXAT CAN@net NT 200 is a CAN-Ethernet gateway, bridge and PC interface CAN@net NT 200 comes with 2 classic CAN channels It offers three operation modes and can be used as a PC interface as bridge and gateway. . Ex stock, if sold out 3 weeks from order. (This product replaces CAN@NetII Generic which is being phased out) -
CANbridge NT 420 – 4 CAN (2 CAN FD)
$1,278.00Configurable CAN-to-CAN Bridge/Router with CAN FD Support CANbridge NT 420 comes with 4 classic CAN channels of which 2 can be configured as CAN FD channels . Enclosure suitable for DIN Rail mounting. This product may take upto 2 to 3 weeks for delivery. -
USB-to-CAN V2 automotive
$1,698.00IXXAT USB to CAN V2 professional, 1 x CAN interface High-Speed and 1 x CAN Low Speed and 1 x LIN (software switchable) with Galvanic Isolation (with 2 x RJ45) -
USB-to-CAN V2 compact (RJ45)
$699.60IXXAT USB to CAN interface (Compact) with 1x High speed CAN interface, RJ45 version V2 with galvanic isolation. -
Kvaser Leaf Light HS v2, M12 ,USB to CAN Interface
$600.60The Kvaser Leaf Light HS v2 M12 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and M12 connector, the Leaf Light HS v2 M12's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard. To know more about the product check the youtube link. -
Kvaser Leaf Light HS v2, USB to CAN Interface
$600.60The Kvaser Leaf Light HS v2 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the Leaf Light HS v2's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard. To learn more about the product check the youtube link.
