Subtotal: $706.20
Subtotal: $706.20
CANObserver
For machines with CANBus network to work optionally the whole control system needs monitoring continually. With age and wear and tear, bus system components will show progressive deterioration of running parameters. These changes can be monitored, diagnosed and reported using GEMAC CANObserver and can be notified to the maintenance manager.
To know more about this product check the youtube link.
This product will take upto 5 weeks for delivery.
Device PhiÂloÂsoÂphy
The CANÂtouch is a batÂteÂry opeÂraÂted handÂheld diaÂgnoÂsis device for phyÂsiÂcal and logiÂcal CAN bus anaÂlyÂsis. With its modern touch conÂtrol it allows an intuiÂtiÂve and effiÂciÂent handÂling without an addiÂtioÂnal comÂpuÂter. As furÂtÂher deveÂlopÂment of the CAN-Bus TesÂter 2 it has not only its funcÂtioÂnaÂliÂty, it has new addiÂtioÂnal meaÂsuÂrements as well. An easier valuaÂtiÂon proÂceÂduÂre with ampÂle colors and smiÂleys supÂport your work with quick valuaÂtiÂon of the meaÂsuÂrements.
CANTouch allows firmware updates, new functionality can be unlocked by purchasing additional licenses.
The inteÂgraÂted batÂteÂry supÂplies power to the device without a proÂblem for a whoÂle intenÂse meaÂsuÂrement day. It is moniÂtoÂred by a speÂcial charÂge conÂtrolÂler that calÂcuÂlaÂtes remaiÂning time and resiÂduÂal charÂge. If all that is not enough – the device is charÂged up to 80% in only one hour regardÂless of wheÂther you are meaÂsuÂring in that time or not.
The rubÂbeÂriÂzed aluÂmiÂnum conÂtiÂnuous casÂting body is not only impresÂsing high quaÂliÂty, it is also extreÂmeÂly robust.
PosÂsiÂbiÂliÂties
The CANÂtouch is a mobiÂle meaÂsuÂring device for CAN-based bus sysÂtems.
The furÂtÂher deveÂlopÂment of the CAN-Bus TesÂter 2 is batÂteÂry-poweÂrÂed and equipÂped with a touch disÂplay. Its intuiÂtiÂve user interÂface allows extenÂsiÂve meaÂsuÂrements to be taken in the shorÂtest posÂsiÂble time. The results can be archiÂved for docuÂmenÂtaÂtiÂon or later anaÂlyÂsis and furÂtÂher proÂcesÂsed on the PC.
The phyÂsiÂcal layÂer meaÂsuÂrements have been extenÂded to incluÂde the direct deterÂmiÂnaÂtiÂon of potenÂtiÂal difÂfeÂrenÂces betÂween the parÂtiÂciÂpants (comÂmon mode /​ground shift).
With the online trigÂger, you can moniÂtor the bus for indiÂviÂduÂal phyÂsiÂcal limits, deterÂmiÂne proÂblems over time and make errors visiÂble in the oscilÂloÂgram.
The proÂtoÂcol moniÂtor is used for senÂding, receiÂving, decoÂding and recordÂing messaÂges.
This Product is only available as a complete kit ( SKU : PR-22580-81 ) and will take upto 5 weeks for delivery.
PosÂsiÂbiÂliÂties
The CAN-Bus TesÂter 2 is a wideÂly used meaÂsuÂring device for conÂtrol of bus paraÂmeÂters. The sucÂcess stoÂry starts alreÂady in year 2002 with the first model. The hardÂware was comÂpleÂteÂly redeÂsiÂgned in verÂsiÂon 2. The corÂreÂsponÂding softÂware is still deveÂloÂped and has been enhanÂced with extenÂsiÂve updates.
Check the setÂup of the bus befoÂre you switch on with the bus wiring test, meaÂsuÂre under runÂning conÂdiÂtiÂons down on the phyÂsiÂcal layÂer and anaÂlyÂses data of the nodes with the proÂtoÂcol moniÂtor. The long time moniÂtor shows scatÂteÂred errors and creeÂping signal loss.
The trigÂger outÂput makes it posÂsiÂble to show data of only one node of the bus.
The greÂat box conÂtents witÂhin the serÂvice case with big adapÂter set makes it posÂsiÂble to use the device out of the box in many enviÂronÂments. You can safe your meaÂsuÂrements and print a staÂtus proÂtoÂcol directÂly from the softÂware.
Bus SysÂtems
The meaÂsuÂring device works in the netÂworks CAN, CANoÂpen, DeviceÂNet and SAE J1939.
To know more about this product check the youtube link.
This product will take upto 5 weeks for delivery.
