TryCom – Page 2 – canconnect

View cart “Isolated 16 CH. Digital Input RS485 Module” has been added to your cart.

View as

Showing 13–24 of 26 results

Page

2

/ 3

Add to cart Add to wishlist Add to compare

Isolated RS232/422/485 Serial Device Server

Rated 0 out of 5

$372.24

Features
Wide input range DC power supply. Fully compatible with Ethernet TCP/IP protocol. Support 3000V DC isolation protection. Auto direction flow control on RS-485. Surge protection on RS-422/485 data lines. Support baud rate up to 230Kbps. Power/Link/TX /RX mode LED indicator. Support intranet and internet system setting function. Support screw terminal and standard external DC power adaptor. Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN8/WIN8.1. DIN rail and panel mount.
Specifications
Power Input Voltage: DC +10V to +30V Interface: Standard RJ45 LAN port LAN: 10/100Base-T, 10/100Mbps auto-detecting. RS-232: 5 full-duplex (TXD, RXD, CTS, RTS, GND) RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , RX-). RS-485: Differential 2 half-duplex wires (D+, D-) Connection type: Screw terminal, accepts AWG#12~30 wire. Signal LED: Power, Link, TX, RX Power supply: Screw terminal, or external DC adapter. Power consumption: 1.6W Isolation voltage: 3000V DC Operating environment: -10 to 50℃ Storage temperature: -20 to 70℃ Humidity: 10~90% Non-condensing Dimension: 151mm X 75mm X 26mm Weight: 375g

Add to cart Add to wishlist Add to compare

Isolated 8 CH. Digital Input and 8 CH. (Open Control) RS485 Module

Rated 0 out of 5

$396.00

Features
Wide input range DC power supply.. Support ASCII and Modbus RTU protocol. Supports baud rates from 1.2Kbps to 115.2 Kbps. All 8 channels digital input ca be used as counter. Digital input signal with 3750Vrms isolation protection. Dual watchdog: Module’s firmware, host computer traffic. LED for each channels working status. DIN rail and panel mount support. Configured and self-test by outer dip-switch. Support screw terminal and external DC power adaptor.
Specifications
Input channel: 8 digital input channels. Input optical isolation: 3750 Vrms. Input logical level 0 : +/-1V (max). Input logical level 1: +/- 4.0V ~ +/- 30V. Digital Input can be used as counter channel:8 Input counter :Dec 0~65535(max) or Hex 0000~FFFF(max). Input impedance: 3Kohm. Input Counter frequency: 100Hz. Input distance: 500M (max). Digital output Maximum voltage: +/-30V. Output Maximum current: 100 mA. Digital output isolation: 3750Vrms. Communication interface: RS-485. Communication speed: Baud rate from 1.2kbps to 115.2Kbps. Dual watchdog: Hardware reset circuit, module and host operating status. Signal LED: Power on, all channels. Power supply: Screw terminal, or external DC adapter. Connection type: Screw terminal, accepts AWG #12~320 wires Power consumption: 1.2W. Operating environment: -10 to 50℃. Storage temperature: -20 to 70℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 400g .

Add to cart Add to wishlist Add to compare

Isolated 4 CH. Digital Input and 4 CH. AC Relay RS485 Module

Rated 0 out of 5

$376.20

Features
Wide input range DC power supply.. Support ASCII and Modbus RTU protocol. Supports baud rates from 1.2Kbps to 115.2 Kbps. All 4 channels digital input ca be used as counter. Digital input signal with 3750Vrms isolation protection. Dual watchdog: Module’s firmware, host computer traffic. LED for each channels working status. DIN rail and panel mount support. Configured and self-test by outer dip-switch. Support screw terminal and external DC power adaptor.
Specifications
Input channel: 4 digital input channels. Input optical isolation: 3750 Vrms. Input logical level 0 +1/-V (max). Input logical level 1 +/-4.0V ~ +/-30V. Digital output Maximum voltage: +/-30V. Communication interface: RS-485. Communication speed: Baud rate from .2kbps to 115.2Kbps. Input impedance: 3Kohm. Distance: 500M (max). Digital Input can be used as counter channel: 4 Counter frequency: 100Hz. Output channel: 4 channel power reply outputs. Relay type: 2 Form A (RL1,RL2) , 2 Form C (RL3,RL4). Contact ratting: 5A /30V DC , 5A /120V AC , 5A /250V AC. Relay surge strength: 4000V. Relay operating time: 3mS. Relay operating life: 2 X 10(7). Dual watchdog: Hardware reset circuit, module and host operating status. Signal LED: Power on, all channels. Power supply: Screw terminal, or external DC adapter. Connection type: Screw terminal, accepts AWG #12~320 wires Power consumption: 2.7W. Operating environment: -10 to 50℃. Storage temperature: -20 to 70℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 400g .

Add to cart Add to wishlist Add to compare

Isolated 16 CH. Digital Input RS485 Module

Rated 0 out of 5

$376.20

Features
Wide input range DC power supply.. Support ASCII and Modbus RTU protocol. Supports baud rates from 1.2Kbps to 115.2 Kbps. All 16 channels digital input ca be used as counter. Digital output signal with 3750Vrms isolation protection. Dual watchdog: Module’s firmware, host computer traffic. LED for each channels working status. DIN rail and panel mount support. Configured and self-test by outer dip-switch. Support screw terminal and external DC power adaptor.
Specifications
Power Input Voltage: DC +10V to +30V. Protocol: ASCII and Modbus RTU. Input channel: 16 digital input channels with counter. Input digital input counter: 0~65535. Input optical isolation: 3750 Vrms. Input logical level 0 +1V (max). Input logical level 1 +4.0V ~ +30V. Communication interface: RS-485.differential 2 half.duples wires. Communication speed: Baud rate from 1200bps to 115.2Kbps. Data format: Data bit: 8, Parity Check: None, Stop Bit: 1 . Input impedance: 3KΩ. Inputs can be use as counter channel: 16. Counter frequency: 100 Hz. Dual watchdog Hardware reset circuit, module and host operating status. Signal LED: Power on, all input channels Power supply: Screw terminal, or standard external DC adapter Power consumption: 1.5W (max) Operating environment: -10 to 50℃. Storage temperature: -20 to 70℃. Humidity: 10-90% non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 395g .

Add to cart Add to wishlist Add to compare

Isolated 16 CH. digital output (Open Collector) RS485 Module

Rated 0 out of 5

$376.20

Features
Wide input range DC power supply.. Support ASCII and Modbus RTU protocol. Supports baud rates from 1.2Kbps to 115.2 Kbps. Digital output signal with 3750Vrms isolation protection. Dual watchdog: Module’s firmware, host computer traffic. LED for each channels working status. DIN-Rail and panel mount support. Configured and self-test by external dip-switch. Support screw terminal and external DC power adaptor.
Specifications
Power Input Voltage DC +10V to +30V. Protocol: ASCII and Modbus RTU. Digital output maximum voltage:+30V. Digital output maximum current: 100mA. Digital output isolation: 3750Vrms. Communication interface: RS-485 differential 2 half/duplex wires. Communication speed form 1.2Kbps to 115.2Kbps auto-switching. Data format: Data bit: 8, Parity Check: None, Stop Bit: 1. Distance: up to 4000ft ( 1200M ). Connection type: Screw terminal for maximum AWG 12 wire. Signal LED: Power, and all output channels. Power supply: Screw terminal, or external DC adapter. Power consumption 1.5W. Operating environment: 0 to 50℃. Storage temperature:. -20 to 70℃. Humidity: 10~90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 395g .

Add to cart Add to wishlist Add to compare

USB to 4 port RS232/422/485 Isolated Converter

Rated 0 out of 5

$673.20

Features
USB-2.0 Device Controller. Support 3KV isolation in RS232/RS422/485 interface. Customer-specified Baud rates are also supported. Each Port cans impendent set up the baud-rate and data format. On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port. Fully PLC support such as Mitsubishi Q,FX and FATEK serial.... Auto direction flow control on RS-485. Auto baud rate switching from 75bps to 921.6 Kbps. Auto switching RS232/422/485 interface. 256 byte buffer for upstream and downstream data flow. Direct power from USB port or external power. Surge protection on RS422/485 data lines. Power and TX/RX communication LED indicator. DIN rail or panel mount support. Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0. RS232 signal: isolated 3KV 4 Pair16c450/16c550 compatible (TXD, RXD, RTS, CTS, ISO. GND) RS422 signal: isolated 3KV 4 Pair Differential 4 full-duplex wires (TX+, RX+, TX-, RX-) RS485 signal: isolated 3KV 4 Pair Differential 2 half-duplex wires (D+, D-). Data Format: Asynchronous data with any combination of bits, parity, stop Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 Stop bits: 1, 1.5, 2. Flow Control: Xon/Xoff, Hardware, None Cable: USB 2.0 type A to type B cable. Communication speed: 75~921Kbps. RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak. RS232 line protection: +/- 15KV ESD. Distance: RS422/485 Up to 4000ft (1250M). Connection type: Screw terminal for maximum AWG #12 ~ 30 wires. Din-Rail mountable: Option. Two power input: USB power or external Power. Power consumption: 190mA by USB power. Operating environment: -10 to 60℃. Storage temperature: -20 to 65℃. Dimension: 151mm X 111mm X 26mm. Weight: 691(W/Packing) . Humidity: 10-90% non-condensing.

Add to cart Add to wishlist Add to compare

USB to 4 port RS232/422/485 Converter

Rated 0 out of 5

$368.28

Features
USB-2.0 Device Controller. Customer-specified Baud rates are also supported. Each Port cans impendent set up the baud-rate and data format. On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port. Fully PLC support such as Mitsubishi Q,FX and FATEK serial.... Auto direction flow control on RS-485. Auto baud rate switching from 75bps to 921.6 Kbps. 256 byte buffer for upstream and downstream data flow. Direct power from USB port, no external power necessary. Surge protection on RS422/485 data lines. Power and TX/RX communication LED indicator. DIN rail or panel mount support. Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0. RS232 signal: 4 Pair16c450/16c550 compatible UARTS. RS422 signal:4 Pair Differential 4 full-duplex wires (TX+, RX+, TX-, RX-) RS485 signal: 4 Pair Differential 2 half-duplex wires (D+, D-). Data Format: Asynchronous data with any combination of bits, parity, stop Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 Stop bits: 1, 1.5, 2. Flow Control: Xon/Xoff, Hardware, None Cable: USB 2.0 type A to type B cable. Communication speed: 75~921Kbps. RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak. RS232 line protection: +/- 15KV ESD. Distance: RS422/485 Up to 4000ft (1250M). Connection type: Screw terminal for maximum AWG #12 ~ 30 wires. Din-Rail mountable: Option. Power consumption: 190mA by USB power. Operating environment: -10 to 60℃. Storage temperature: -20 to 65℃. Dimension: 151mm X 111mm X 26mm. Weight: 691(W/Packing) . Humidity: 10-90% non-condensing.

Add to cart Add to wishlist Add to compare

USB to 4 port RS232 Optical Isolated Converter

Rated 0 out of 5

$384.12

Features
USB-2.0 device controller. Allow user custom adjust baud-rates. Each Port can impendent set up the baud-rate and data format. On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port. System gets four serial port when the converter plug in. Direct power from USB port , no need external power supply. 3000 VDC isolation protection on RS232. Power and TXA/RXA/TXB/RXB/TXC/RXC/TXD/RXD communication LED indicator Din-Rail (option)or panel mount Driver support: Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0 protocol. RS232 output: TXD,RXD.GND. Data Format: Asynchronous data with all common combination of bits, parity, stop Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 Stop bits: 1, 1.5, 2. Cable: USB 2.0 type A to type B cable. Communication speed: form 300bps to 256Kbps. RS-232 line protection: +/- 15KV ESD. Connection type: Screw terminal for maximum AWG #12~30 wire. DIN rail and panel mount support. Power consumption: 70mA by USB power. Operating environment: 0 to 65℃. Storage temperature: -20 to 65℃. Dimension: 151mm X 75mm X 26mm. Weight: 395g. Humidity: 10-90% non-condensing. .

Add to cart Add to wishlist Add to compare

USB to 2 ports RS232 and 2 ports RS422/485 Isolated Converter

Rated 0 out of 5

$435.60

Features
USB-2.0 device controller. Allow user custom adjust baud-rates. Each Port can impendent set up the baud-rate and data format. On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port. System gets four serial port when the converter plug in. Auto switching RS422/485 detecting. Auto direction flow control on RS485. Auto baud rate switching from 300bps to 256 Kbps. Direct power from USB port , no need external power supply. 3000 VDC isolation protection on RS422/485. Surge protection on RS422/485 data line. Power and TXA/RXA/TXB/RXB communication LED indicator Din-Rail (option)or panel mount Driver support: Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0 protocol. RS232 output: Standard 9 pin DTE full-duplex. RS422 output: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-) RS485 output: Differential 2 half-duplex wires (D+, D-). Data Format: Asynchronous data with all common combination of bits, parity, stop Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 Stop bits: 1, 1.5, 2. Cable: USB 2.0 type A to type B cable. Communication speed: form 300bps to 256Kbps. RS-422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak. RS-232 line protection: +/- 15KV ESD. Distance: RS-422/485 Up to 4000ft (1250M). Connection type: Screw terminal for maximum AWG #12~30 wire. DIN rail and panel mount support. Two power input: USB power or external Power. Power consumption: 260mA by USB power. RS422/485 Optical Isolation: 3000V DC. Operating environment: 0 to 65℃. Storage temperature: -20 to 65℃. Dimension: 151mm X 75mm X 26mm. Weight: 395g. Humidity: 10-90% non-condensing. .

Add to cart Add to wishlist Add to compare

USB to 1 RS232 and 1 RS422/485 Isolated Converter

Rated 0 out of 5

$297.00

Features
USB-2.0 Device Controller Allow user custom adjust baud-rates. Each Port can impendent set up the baud-rate and data format. OS. system get dual port UART serial (1RS232 and 1RS422/485). On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port. Fully PLC support such as Mitsubishi Q,FX and FATEK serial.... Auto direction flow control on RS-485. Auto baud rate switching from 75bps to 921.6 Kbps. 256 byte buffer for upstream and downstream data flow. Direct power from USB port , no external power necessary. 3000V DC isolated protection. Surge protection on RS422/485 data lines. Power and TXA/RXA/TXB/RXB communication LED indicator . DIN rail or panel mount support. Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0. Output: RS232 signal: Standard 9 pin DTE full-duplex. RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-) RS485 signal: Differential 2 half-duplex wires (D+, D-). Optical Isolation:RS422/485 3KV. Data Format: Asynchronous data with any combination of bits, parity, stop Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 Stop bits: 1, 1.5, 2. Flow Control: Xon/Xoff, Hardware, None Cable: USB 2.0 type A to type B cable. Communication speed:75~256Kbps. RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak. RS232 line protection: +/- 15KV ESD. Distance: RS422/485 Up to 4000ft (1250M). Connection type: Screw terminal for maximum AWG #12~30 wire. Din-Rail mountable: Option. Power consumption:130mA by USB power. RS422/485 Optical Isolation: 3000V DC. Operating environment: -10 to 50℃. Storage temperature: -20 to 65℃. Dimension: 151mm X 111mm X 26mm. Weight: 375g. Humidity: 10-90% non-condensing.

Add to cart Add to wishlist Add to compare

USB to RS232/422/485 Optical Isolated Converter

Rated 0 out of 5

$205.92

Features
Full compliance with the USB V1.0 and 2.0 specification. System gets 1 COM port when the converter is connected. Auto data format detecting. Auto direction flow control on RS-485. Programmable baud rate from 75 bps to 6 Mbps RS232/422/485 Support 3KV isolation 256 byte buffer for upstream and downstream data flow. Direct power from USB port , no external power necessary. 3000V DC isolated protection. Surge protection on RS422/485 data lines. Power/TX/RX mode LED indicator. DIN rail or panel mount support. Driver support: Android/Windows 8/8.1/ 98/ME/2000/XP/CE3.0/WIN 10, and Linux, and Mac OS.
Specifications
USB interface: Fully compliant with V1.0, 2.0 specification. USB to serial bridge controller; Prolific PL2303TA (TRP-C08 Version:2.1). RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND). RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-). RS-485 signal: Differential 2 half-duplex wires (D+, D-). Data Format: Asynchronous data with all common combination of bits, parity, stop. Parity type: None, odd, even mark, space. Data bit: 5, 6, 7, 8 or 16. Stop bits: 1, 1.5, 2. Cable: USB type A to type B. Communication speed: 75~128KBbps. RS-422/485 line protection: Against surge, short circuit, and voltage peak. Transmission distance: RS-422/485 Up to 4000ft (1200M ). Connection type: Screw terminal accepts AWG #12~30 wires. Signal LED: Power on, TX, RX. Direct power from USB port. Power consumption: 1.2W. Isolation voltage: 3000V DC. Operating environment: -10 to 50℃ . Storage temperature: -20 to 70℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 375g .

Add to cart Add to wishlist Add to compare

RS422/485 Optical Isolated Repeater

Rated 0 out of 5

$324.72

Features
Wide input range DC power supply. Automatic data format configuration. Auto direction flow control on RS-485. Auto baud rate switching from 300bps to 115.2Kbps. RS485 bi-directionally communication. 3000 DC isolated protection. Surge protection on RS-422/485 data lines. Power/TX/RX mode LED indicator. Support screw terminal and external DC adapter. DIN rail or panel mount support.
Specifications
Power input voltage: DC +10V to +30V. Power input type: Support screw terminal or external DC adaptor. Interface: Industrial plug-in screw terminal. RS-485 signal: differential 2 half-duplex wires. (D+,D-). RS-422 signal: differential 4 full-duplex wires. (TX+,RX+, TX- ,RX-). Plug-in screw terminal wiring: Accepts AWG -#12~30 wire. Distance: extend RS-422/485 signal up to 4000ft (1200M ). Isolation voltage: 3000V DC. LED indicator: Power, TX, and RX. Power consumption: 1.2 watt. Operating Temperature：-10 to 50℃ . Storage Temperature: -20 to 70℃. Humidity: 10-90% Non-condensing. Dimension: 151mm X 75mm X 26mm . Weight: 380g.