Kvaser
Filter Close
View as

Showing 1–12 of 13 results

Page
1
/ 2
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser D-sub 9 pin 120 Ohm termination adapter

    Rated 0 out of 5
    $63.80
    Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser BlackBird v2

    Rated 0 out of 5
    $2,118.60
    Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion.
    To learn more about the product check the youtube link.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser OBD II Extension Cable 15m

    Rated 0 out of 5
    $561.00
    Kvaser's OBD II Extension Cable is a highly durable extension cable of 15 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser OBD II Extension Cable 5m

    Rated 0 out of 5
    $265.32
    Kvaser's OBD II Extension Cable is a highly durable extension cable of 5 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser OBD II Extension Cable 2.5m

    Rated 0 out of 5
    $196.68
    Kvaser's OBD II Extension Cable is a highly durable extension cable of 2.5 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser Air Bridge Light HS

    Rated 0 out of 5
    $1,829.52
    Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN. There are two versions: (00808-3) Kvaser Air Bridge Light HS is approved for the European Union, while (01008-6) Kvaser Air Bridge Light HS (FCC) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser Mini PCI Express HS

    Rated 0 out of 5
    $729.96
    The Kvaser Mini PCI Express HS is a highly-integrated CAN (controller area network) add-on board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability. The add on board offers a single channel, high speed CAN interface with error frame detection and on-board buffer. This board has a low profile connector that complies with the mini PCI Express standard, which connects via a cable to a DSUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected because all the electronics remain inside the computer housing. To learn more about the product, view the youtube link  
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser OBD II Extension Cable 10m

    Rated 0 out of 5
    $364.06
    Kvaser's OBD II Extension Cable is a highly durable extension cable of 10 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser Leaf Light HS v2, M12 ,USB to CAN Interface

    Rated 0 out of 5
    $600.60
    The Kvaser Leaf Light HS v2 M12 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and M12 connector, the Leaf Light HS v2 M12's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard. To know more about the product check the youtube link.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser Leaf Pro HS v2, USB to CAN Interface

    Rated 0 out of 5
    $1,115.00
    Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin DSUB, bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser Memorator Pro 2xHS v2 Data logger

    Rated 0 out of 5
    $2,467.08
    Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB2.0, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant. Youtube Link for learning more about Kvaser Memorator Pro
    1. Quick start guide
    2. Advanced Tutorial
  • Quick view
    Add to cart Add to wishlist Add to compare

    Kvaser USBcan Pro 2xHS v2, USB to CAN Interface

    Rated 0 out of 5
    $1,764.84
    Kvaser USB to CAN V2 Pro with 2 x High Speed CAN (supports CAN FD also) with 2x Sub D9 plug connector