Cart (0)
Close
-
L-Handle grip (Black) with dual trigger, 6 momentary faceplate switches 10 ft. lead
$679.80L handle 6 momentary switches, dual trigger, 10 ft lead. This product may take upto 4 weeks for delivery. -
L-Handle grip (Black) with dual trigger, 8 momentary faceplate switches 10 ft. lead
$684.20L handle 8 momentary switches, dual trigger, 10 ft lead. This product may take upto 4 weeks for delivery. Note: This L handle design is of LU type. -
CAN-IB400/PCI
$713.00Active CAN Interface for PCI 1 x CAN (High-Speed) With the CAN-IB400/PCI HMS offers an PCI interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as CAN (ISO 11898-2). Features and benefits- Active PCI board with 32 bit microcontroller
- Easy expandable via field bus expansion and expansion board
- One CAN channel (High-Speed)
- Galvanic isolation of the CAN interface
- Uniform driver packages support all IXXAT CAN and CAN-FD interfaces and allow easy change of the PC interface type
- Powerful programming interface for Windows "VCI" as well as "ECI" for Linux, QNX, RTX, INtime and VxWorks
-
USB-to-CAN V2 professional
$1,290.00IXXAT USB to CAN V2 professional, 2 x CAN interface High-Speed with Galvanic Isolation (with 2 x RJ45) USB to CAN V2 professional is the recommended IXXAT CAN Interface by MTU for DiaSys.  DiaSys is a Windows®-based software tool that helps technicians communicates with a wide range of MTU engine controllers. DiaSys allows the user to perform required maintenance and servicing tasks, including reading and recording measurement values/process variables. -
USB-to-CAN V2 compact (Sub D9)
$699.60IXXAT USB to CAN interface (Compact) with 1x High speed CAN interface, Sub D9 version V2 with galvanic isolation. -
CAN-IB200/PCIe
$720.00CAN-IB200/PCIe Active CAN Interface for PCI Express 1 x CAN (High-Speed), Galvanic Isolation With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as CAN (ISO 11898-2), and is available with a standard or a low-profile slot bracket. Other configurations will be available on consultation based on actual requirements, such as number of CAN interfaces. -
CAN-IB100/PCIe
$594.43CAN-IB100/PCIe, 1 x CAN Interface High-Speed, Galvanic Isolation Passive CAN Interface for PCI Express With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. Other configurations will be available on consultation based on actual requirements, such as number of CAN interfaces and low speed/high speed CAN. -
CANblue II
$772.00Features and benefits- Quick start-up and connection
- High transmission range
- Low latency transmission and high data throughput
- Flexible configuration options (combination of several CANblue II)
How it works
Bridge mode The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue II devices. Message exchange occurs on layer 2 and is transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. CAN-ID filters can be set for data exchange via Bluetooth. Using more than 2 CANblue devices, multiple busses can be linked with each other. ASCII/Binary protocol mode In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue II are available to the user based on simple ASCII commands and optimized CAN binary messages. The CANblue II is ideal for "non-Windows" systems or embedded platforms. PC operation mode with VCI driver support Because it is supported by the VCI CAN driver, the CANblue II can be operated with all IXXAT tools and with customer-specified programs. In addition, wireless access to CAN systems via Bluetooth can also be easily achieved with existing VCI-based application programs and tools.
-
CANbridge NT 200 – 2 Channel
$418.00Configurable CAN-to-CAN Bridge with 2 x High Speed CAN interfaces. CANbridge NT 200 comes with 2 classic CAN channels . Enclosure suitable for DIN Rail mounting. This product may take upto 2 to 3 weeks for delivery. -
CAN@net II/Generic
$928.40CAN-Ethernet gateway and CAN-Ethernet-CAN bridge The CAN@net II/Generic enables easy and flexible access to CAN systems via Ethernet. The device provides two operation modes, a bridge mode and a gateway mode. Features and Benefits- Bridging of large distances and easy system access using Ethernet
- Filter and conversion functionality
- Cost savings due to simple wiring
-
CAN@net II/VCI
$928.40ÂActive Ethernet interface
1 x CAN (High-Speed) The CAN@net II allows simple, flexible access from a PC to CAN systems via Ethernet. Due to its ability to support the TCP/IP protocol, the CAN@net II allows the worldwide direct connection to a PC, implementation in an LAN, or, communication with the gateway via the Internet. Features and benefits- Easy CAN access over large distances
- Common driver interface for easy exchange of the PC interface type
- Also abailable as gateway/bridge device
-
CAN-CR210/FO
$0.00CAN-CR210/FO Glass Fiber Version with ST Connector [Extended Temp. Range] Stackable converter from ISO 11898-2 to fiber optic cable The CAN-CR210/FO is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection against EM-influences. For creating star or tree topologies, several CAN-CR210/FO can be connected to a CAN-hub via the integrated backbone bus (also in conjunction with CAN-CR200). One special feature of the repeater is, that it separates a defective segment from the rest of the network, so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
