Cart (1)
Close
-
Isolated 16 CH. Digital Input RS485 Module
Qty: 1 $376.20
Subtotal: $376.20
-
RS232 to RS422/485 Optical Isolated Converter
$190.08Features:- Wide range input DC power supply.
- Automatic data format configuration.
- Auto direction flow control on RS-485.
- Auto baud rate switching from 300bps to 115.2Kbps.
- 3000V DC isolated protection.
- Surge protection on RS-422/485 data lines.
- Power/TX/RX mode LED indicator.
- Support screw terminal and external DC power adaptor.
- Din rail or panel mounts support.
- Power input voltage: DC +10V to +30V.
- Host connection: Standard D-Sub 9 pin female connectors.
- RS-232 interface: Standard D-Sub 9 pin female connector
- RS-232 signal: TXD, RXD, and GND.
- RS-422/485 interface: Industrial plug-in screw terminal.
- RS-485 signal: differential 2 half-duplex wires (DATA+, DATA-).
- RS-422 signal: differential 4 full-duplex wires. (TX+, RX+, TX- , RX-)
- Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.
- Transmission distance: RS-422/485 up to 4000ft (1200M).
- Communication speed: from 300bps to 115.2Kbps.
- Isolation voltage: 3000V DC.
- Serial data format: Asynchronous data with all common combination of bits, parity, stop.
- Signal LED: Power on, TX, and RX.
- Power supply: Screw terminal, or external DC adapter.
- Power consumption: 1.2 watt.
- Operating Temperature：-10 to 50℃ .
- Storage Temperature: -20 to 70℃.
- Humidity: 10-90% Non-condensing.
- Dimension: 151mm X 75mm X 26mm
- Weight: 375g .
-
Anybus Communicator CAN Modbus RTU
$1,074.00The chosen interfaces within this Anybus gateway are:- CAN-based
- Modbus RTU Slave
-
NT 100-CO-DP Gateway CANopen to PROFIBUS
$1,920.00Product name: NT 100-CO-DP Part number: 1716.180- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT 100-DP-CO Gateway PROFIBUS to CANopen
$1,920.00Product name: NT 100-DP-CO Part number: 1718.160- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT 100-DN-DP Gateway DeviceNet to PROFIBUS
$837.00Product name: NT 100-DN-DP Part number: 1717.180- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT 100-RE-CO Gateway POWERLINK/ EtherCAT/ PROFINET/ EtherNet IP/ MODBUS TCP/ Sercos to CANopen
$1,920.00Product name: NT 100-RE-CO Part number: 1712.160- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT-100-RE-DP Gateway Powerlink/ MODBUS TCP/ EtherCAT/ PROFINET/ Sercos/ EtherNet IP to PROFIBUS DP
$1,920.00Product name: NT 100-RE-DP Part number: 1712.180- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT 100-RE-EN Gateway POWERLINK/ PROFINET/ EtherCAT/ Sercos/ MODBUS TCP/ EtherNet IP to Open Modbus TCP
$1,920.00Product name: NT 100-RE-EN Part number: 1712.110- Flexible use of Modbus TCP as Client or Server
- Shortest I/O data conversion time lower than 10 ms
- Device replacement in seconds via memory card based loading
- Loadable firmware for flexible use of other conversions
- With USB diagnostic and configuration port
-
NT 50-CO-EN Gateway CANopen to Ethernet IP/ Modbus TCP/ PROFINET
$837.00Product name: NT 50-CO-EN Part number: 1756.110 Brief description: Gateway CANopen to Ethernet- Integrates a single CANopen Slave into a Modbus TCP network
- Flexible use of Modbus TCP as Client or Server
- Short I/O data conversion time lower than 20 ms
- Extremely space-saving compact design
- Loadable Firmware for flexible use of other conversions
- With Ethernet diagnostic and configuration port
-
NT 50-DP-EN Gateway PROFIBUS DP to EtherNet IP/ PROFINET/ Modbus TCP
$837.00Product name: NT 50-DP-EN Part number: 1758.110 Brief description: Gateway PROFIBUS DP to Ethernet -Integrates a single PROFIBUS DP Master/slave into a Modbus TCP network -Flexible use of Modbus TCP as Client or Server -Short I/O data conversion time lower than 20 ms -Extremely space-saving compact design -Loadable Firmware for flexible use of other conversions -With Ethernet diagnostic and configuration port -
CAN@net NT 420 – CAN Ethernet Gateway
$1,438.80IXXAT CAN@net NT 420 is a CAN-Ethernet gateway, bridge and PC interface with Up to 4 x CAN of which 2 x CAN FD CAN@net NT 420 offer three operation modes and can be used as a PC interface as bridge and gateway. This product may take upto 2 to 3 weeks for delivery. -
CAN@net NT 200 – CAN Ethernet Gateway
$963.60IXXAT CAN@net NT 200 is a CAN-Ethernet gateway, bridge and PC interface CAN@net NT 200 comes with 2 classic CAN channels It offers three operation modes and can be used as a PC interface as bridge and gateway. . Ex stock, if sold out 3 weeks from order. (This product replaces CAN@NetII Generic which is being phased out)
