Category: CAN tools

View cart “CANcheck Installation tester for CAN networks” has been added to your cart.

View as

Showing 1–12 of 31 results

Page

/ 3

Quick view
Add to cart Add to wishlist Add to compare
CL3000 CAN BUS LOGGER with Real-time Clock and WiFi (16 GB)
Rated 0 out of 5
$877.80
The CL3000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a WiFi data logger with SD card and a wired CAN interface with a real-time clock.
Quick view
Add to cart Add to wishlist Add to compare
CL2000 CAN BUS LOGGER with Real-time Clock (8 GB variant)
Rated 0 out of 5
$503.80
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock.
Quick view
Add to cart Add to wishlist Add to compare
CL2000 CAN BUS LOGGER with Real-time Clock (32 GB variant)
Rated 0 out of 5
$635.80
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock.
Quick view
Add to cart Add to wishlist Add to compare
CL1000 CAN BUS LOGGER (8 GB variant)
Rated 0 out of 5
$371.80
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface.
Quick view
Add to cart Add to wishlist Add to compare
CL1000 CAN BUS LOGGER (32 GB variant)
Rated 0 out of 5
$503.80
The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface.
Quick view
Add to cart Add to wishlist Add to compare
CANedge2 (8 GB) – 2x CAN BUS Data Logger with WiFi
Rated 0 out of 5
$987.80
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates.
Quick view
Add to cart Add to wishlist Add to compare
CANedge2 (32 GB) – 2x CAN BUS Data Logger with WiFi
Rated 0 out of 5
$1,119.80
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 32 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates.
Quick view
Add to cart Add to wishlist Add to compare
CANedge1 (8 GB) – 2x CAN BUS Data Logger
Rated 0 out of 5
$657.80
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card.
Quick view
Add to cart Add to wishlist Add to compare
CANedge1 (32 GB) – 2x CAN BUS Data Logger
Rated 0 out of 5
$789.80
The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 32 GB industrial SD card.
Quick view
Read more Add to wishlist Add to compare
X-Analyser 3
Rated 0 out of 5

It's a Network Analysis & Simulation Tool for CAN, CAN FD, NMEA2000, J1939, CANopen, LIN by Warwick Control Technologies. Further maintenance which includes email support and updates for 1 year. Year 1 is free since X-Analyser includes 12 months maintenance. Year 2 is 25% of RRP Year 3 is 75% of RRP to encourage customers to have maintenance Year 4 or greater - 100% of RRP
Quick view
Add to cart Add to wishlist Add to compare
Contactless reader CANCrocodile
Rated 0 out of 5
$147.84
CANCrocodile is designed for safe data reading from vehicle CAN bus. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from CANbus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection and without damaging CAN wires. CANCrocodile works in “listen” mode only, i.e. it does not change original J1939 messages and does not send any signals to CANbus.
Compatible for SAE J1939, CAN Open, DeviceNet, NMEA 2000
Nominal supply voltage: 12/24 V (5V – on request ; 2/24 A++ (low current consumption) – on request)
Current consumption: 300mA for “5V” version; 30/15mA for “12/24V” version; 10/5mA for “12/24 A++” version

Cable length- 0.7m (2 m– on request)
Cable connector- Molex/bare wires/Special connector (specify when ordering)
Quick view
Add to cart Add to wishlist Add to compare
CANcheck Installation tester for CAN networks
Rated 0 out of 5
$2,930.40
CANcheck: Installation tester for CAN networks CANcheck allows users to analyse CAN networks during commissioning, maintenance and helps searching faults. This battery-operated, hand-held device connects to the CAN network to be tested and operates using a clearly-structured menu. Available in stock.

GEMAC Licenses for CANopen

PCAN-USB, CAN interface for USB

CANcheck Installation tester for CAN networks

GEMAC Licenses for CANopen

PCAN-USB, CAN interface for USB

CANcheck Installation tester for CAN networks

CL3000 CAN BUS LOGGER with Real-time Clock and WiFi (16 GB)

CL2000 CAN BUS LOGGER with Real-time Clock (8 GB variant)

CL2000 CAN BUS LOGGER with Real-time Clock (32 GB variant)

CL1000 CAN BUS LOGGER (8 GB variant)

CL1000 CAN BUS LOGGER (32 GB variant)

CANedge2 (8 GB) – 2x CAN BUS Data Logger with WiFi

CANedge2 (32 GB) – 2x CAN BUS Data Logger with WiFi

CANedge1 (8 GB) – 2x CAN BUS Data Logger

CANedge1 (32 GB) – 2x CAN BUS Data Logger

X-Analyser 3

Contactless reader CANCrocodile

CANcheck Installation tester for CAN networks

FREE SHIPPING

SUPPORT 24/7

30 DAYS RETURN

100% PAYMENT SECURE

Best Categories

Useful Links

Services

Newsletter Signup

GEMAC Licenses for CANopen

PCAN-USB, CAN interface for USB

CANcheck Installation tester for CAN networks

JOIN OUR NEWSLETTER

Contact Us

Useful Links

Services

CAN tools (31 Items)

FREE SHIPPING

SUPPORT 24/7

30 DAYS RETURN

100% PAYMENT SECURE

Best Categories

Useful Links

Services

Newsletter Signup

JOIN OUR NEWSLETTER

Contact Us

Useful Links

Services