Gateway & Connectivity Product
Filter Close
View as

Showing 1–12 of 23 results

Page
1
/ 2
  • Quick view
    Add to cart Add to wishlist Add to compare

    Isolated 8 CH. Analog Input Modbus TCP Module

    Rated 0 out of 5
    $586.08
    Features
    •    Wide input range DC power supply.
    •    Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol.
    •    16 TCP Port can be open at the same time.
    •    Heart Beat function ensures a reliable communicating connection.
    •    Maximum 8 sets host IP that limits network access.
    •    Support Virtual-COM mode.
    •    The web-based can be directly read analog value status.
    •    It is easy to update the firmware by LAN interface.
    •    Back to factory configuration by external touch button.
    •    Auto reconnection when power or Ethernet fail.
    •    Digital input signal from +/- 0 to 30V DC.
    •    Built-in surge absorbers in each relay N.C and N.O.
    •    Built-In watchdog function prevents system boot fail.
    •    LED for each I/O channels working status.
    •    Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    •    Power/Link LED indicator.
    •    DIN-Rail and panel mount support.
    •    Dual power input selects from screw terminal or DC-Jack.
     
    Specifications
    • Resolution: 16 bit/24bit.
    • Sample rate: 24 BIT Normal mode: 10 sample / sec.  16 BIT Fast Mode: 60 sample / sec.
    • Bandwidth: Normal Mode: 15.72Hz.
    Fast Mode:/78.72Hz. Zero drift: 0.03uV/C . Span drift: 25 ppm/C.
    • Accuracy: Normal 0.1 or better. Fast: 0.5 or better.
    • Analog Input range: Voltage:±10V,±5V,±2.5V,±1.25V,±650mV. Current: +/-20mA. CMRR:92 db min/50/60Hz
    • Analog input over voltage protection: +/- 48V.
    • Power Input Voltage DC +10V to +30V.
    • Protocol: TRP-ASCII and Modbus RTU/ASCII.
    • Input channel:8-ch analog Input differential
    • Input optical isolation: 3750 Vrms.
    • Communication interface: Ethernet RJ45.
    • Configuration mode: Device Manager, WEB settings.
    • Heart Beat: TCP Port sent string every 5 seconds.
    • TCP Maximum Connection:1~16.
    • Module ID: 1~255.
    • Connection type: Screw terminal for maximum AWG 12 wire.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption 320mA/12V.
    • Operating environment: 0 to 50℃.
    • Storage temperature: -10 to 70℃.
    • Humidity: 10~90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm.
    • Weight: 395g.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Isolated 4 channel Digital Input and 4 channel AC Relay Modbus TCP Module

    Rated 0 out of 5
    $455.40
    Features
    • Wide input range DC power supply.
    • Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol.
    • 16 TCP Port can be open at the same time.
    • Heart Beat function ensures a reliable communicating connection.
    • Maximum 8 sets host IP that limits network access.
    • Support Virtual-COM mode.
    • WEB PAGE can be directly read IO status.
    • Easily update the firmware using the Internet.
    • Back to factory configuration by external touch Button.
    • Auto reconnection when power or Ethernet fail.
    • Digital input signal from +/- 0 to 30V DC.
    • Built-in surge absorber in each relay N.C and N.O.
    • Built-In watchdog function prevents system boot fail.
    • LED for each I/O channels working status.
    • Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    • Power/Link/8 CH D I/O LED indicator.
    • DIN-Rail and panel mount support.
    • Dual power input select from screw terminal or DC-Jack..
     
    Specifications
    • Power Input Voltage DC +10V to +30V.
    • Protocol: TRP-ASCII and Modbus RTU/ASCII.
    • Input channel: 16 digital input channels with counter.
    • Input digital input counter: 0~65535.
    • Input optical isolation: 3750 Vrms.
    • Input logical level 0 +1V (max).
    • Input logical level 1 +4.0V ~ +30V.
    • Output channel: 4 channel power reply outputs.
    • Relay type: 2 Form A (RL1,RL2) , 2 Form C (RL3,RL4).
    • Contact ratting: 5A /30V DC , 5A /120V AC , 5A /250V AC.
    • Relay surge strength: 4000V.
    • Relay operating time: 3mS.
    • Relay operating life: 2 X 10(7).
    • Communication interface: Ethernet RJ45.
    • Configuration mode: Trycom Device Manager, WEB settings.
    • Matching remote control: with another TRP-C28H.
    • Heart Beat: TCP Port sent string every 5 seconds.
    • TCP Maximum Connection:1~16.
    • Module ID :1~255.
    • Connection type: Screw terminal for maximum AWG 12 wire.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption 320mA/12V.
    • Operating environment: 0 to 50℃.
    • Storage temperature:. -10 to 70℃.
    • Humidity: 10~90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 395g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    Isolated 16 CH. Digital Input with Counter Modbus TCP Module

    Rated 0 out of 5
    $455.40
    Features
    • Wide input range DC power supply.
    • Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol.
    • 16 TCP Port can be open at the same time.
    • Heart Beat function ensures a reliable communicating connection.
    • Maximum 8 sets host IP that limits network access.
    • Support Virtual-COM mode.
    • WEB PAGE can be directly read IO status.
    • Easily update the firmware using the Internet.
    • Back to factory configuration by external touch Button.
    • Auto reconnection when power or Ethernet fail.
    • Digital input signal from +/- 0 to 30V DC.
    • Built-In watchdog function prevents system boot fail.
    • LED for each I/O channels working status.
    • Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    • Power/Link/16 CH DI LED indicator.
    • DIN-Rail and panel mount support.
    • Dual power input select from screw terminal or DC-Jack.
     
    Specifications
    • Power Input Voltage DC +10V to +30V.
    • Protocol: TRP-ASCII and Modbus RTU/ASCII.
    • Input channel: 16 digital input channels with counter.
    • Input digital input counter: 0~65535.
    • Input optical isolation: 3750 Vrms.
    • Input logical level 0 +1V (max).
    • Input logical level 1 +4.0V ~ +30V.
    • Communication interface: Ethernet RJ45.
    • Configuration mode: Trycom Device Manager, WEB settings.
    • Matching remote control: with TRP-C24H.
    • Heart Beat: TCP Port sent string every 5 seconds.
    • TCP Maximum Connection:1~16.
    • Module ID :1~255.
    • Connection type: Screw terminal for maximum AWG 12 wire.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption 240mA/12V.
    • Operating environment: 0 to 50℃.
    • Storage temperature:. -10 to 70℃.
    • Humidity: 10~90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 395g.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Isolated 16 CH. Open Control Modbus TCP Module

    Rated 0 out of 5
    $435.60
    Features
    • Wide input range DC power supply.
    • Automatically determine 3 TRP-ASCII and Modbus RTU/ASCII communication protocol.
    • 16 TCP Port can be open at the same time.
    • Heart Beat function ensures a reliable communicating connection.
    • Maximum 8 sets host IP that limits network access.
    • Each channel supports the mono stable circuit and auto save the time period to EEPROM.
    • Support Virtual-COM mode.
    • IO status can be set in the boot!
    • WEB PAGE can be directly output and read IO status.
    • Easily update the firmware using the Internet.
    • Back to factory configuration by external touch button.
    • Auto reconnection when power or Ethernet fail.
    • Digital output signal with 3750Vrms isolation protection.
    • Built-In watchdog function prevents system boot fail.
    • LED for each I/O channels working status.
    • Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    • Power/Link/16 CH DO LED indicator.
    • DIN-Rail and panel mount support.
    • Dual power input select from screw terminal or DC-Jack.
     
    Specifications
    • Power Input Voltage DC +10V to +30V.
    • Protocol: TRP-ASCII and Modbus RTU/ASCII.
    • Digital output maximum voltage:+30V.
    • Digital output maximum current: 100mA.
    • Digital output isolation: 3750Vrms.
    • Pulse timer:1~65535 (100ms/unit).
    • Communication interface: Ethernet RJ45.
    • Configuration mode: Trycom Device Manager, WEB settings.
    • Matching remote control: with TRP-C26H.
    • Heart Beat: TCP Port sent string every 5 seconds.
    • TCP Maximum Connection:1~16.
    • Module ID :1~255.
    • Connection type: Screw terminal for maximum AWG 12 wire.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption 240mA/12V.
    • Operating environment: 0 to 50℃.
    • Storage temperature:. -10 to 70℃.
    • Humidity: 10~90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 395g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    Bluetooth to RS232/422/485 Converter

    Rated 0 out of 5
    $475.20
    Features
    • Bluetooth V1.2 Class 1 compliance. (2.5mW/4dBm)
    • Transmission range open filed over to 100M.
    • Auto reconnect when the external power lost.
    • Auto clear serial buffer when the data continuity input when re-boot.
    • Auto directionally RS485 signal communication.
    • Option to 1KM when replace the direction antenna.
    • Support all common baud rate from 1.2K to 256Kbps.
    • Friendly interface TRP-BT configuration windows utility
    • RS422 and RS485 signal auto switching.
    • LED indicators for Power/Link/TX/RX.
    • Surge protection on RS422/RS485.
    • Power supply: Screw terminal, or external DC adapter.
    • Wide input range power supply.
    • DIN rail and panel mount support.
     
    Specifications
    • Power requirement: DC voltage input from +10V to +30V.
    • RS232 signal: TXD, RXD, GND, RTS, CTS.
    • RS422/485 connection: industrial plug-in screw terminal.
    • RS485 signal: differential 2 half-duplex wires. (D+, D-)
    • RS422 signal: differential 4 full-duplex wires.(TX+, TX-, RX+, RX-)
    • Baud rate: 1.2Kbps to 256Kbps.
    • Data bit: 8
    • Support Parity check: None, Even, Odd.
    • Stop bit: 1, 2.
    • RS232 flow control RTS/CTS: Enable, Disable.
    • Host PC com port to TRP-C51 connection: use null modem female-female cable.
    • Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.
    • Wireless transmission distance: Open filed: 100M.
    • Antenna cable length:1530mm.
    • RS422/485 distance: up to 4000ft. (1200M)
    • LED indicator: Power, Link, TX, and RX.
    • Power input type: Screw terminal or DC plug.(5.5*2.1*12mm/500mA)
    • Power consumption: 1.2 watt.
    • Operating temperature: -10 to 50℃.
    • Storage temperature: -20 to 65℃.
    • Humidity: 10-90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm.
    • Weight:  400g.
  • Quick view
    Add to cart Add to wishlist Add to compare

    Ethernet to Fiber Media Converter, SC/20KM

    Rated 0 out of 5
    $324.72
    Features
    • Wide input range DC power supply.
    • Plug-and-Play design for the installation within seconds.
    • Compact and Rugged Metal case capable of withstanding harsh environment.
    • Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.
    • Auto MDI-X/MDI-II for 10/100Base-TX port.
    • Provides media conversion from UTP to Fiber Optic media types
    • Supports link fault pass through function.
    • Supports far end fault function.
    • LED display to indicate the whole working status.
    • 3 power input types: Direct USB power, external DC adapter and screw terminal.
    • Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.
    Specifications
    • Cable: Fiber cable (9/125um).
    • One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
    • One 100Mbps fiber port with Single-mode SC connector.
    • Built in 128Kb RAM for data buffer.
    • Wavelength: 1310 nM.
    • Fiber Power:-15 ~ -8 dBm.
    • LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB.
    • Distance : 20KM can be up to 60KM  (option).
    • Speed : Auto 10/100MB.
    • Power Consumption: 12V/160mA.
    • Power requirement: USB port power or DC input or screw terminal from +10 to 30V.
    • Operating temperature: -10 to 50℃.
    • Storage temperature : -20 to 70℃.
    • Humidity: 10-90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 400g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    Fiber to RS232/422/485 Isolated Converter, SC/40KM

    Rated 0 out of 5
    $475.20
    Feature
    • Wide input range DC power supply.
    • SC single mode fiber port.
    • Auto direction flow control on RS-485.
    • Auto RS-232/422/485 signals switching.
    • Auto data format detecting.
    • Auto baud rate switching from 300bps to 115.2Kbps.
    • Support 3000V DC isolation protection.
    • Support surge protection on RS-422/485 data lines.
    • Power/TX/RX mode LED indicator.
    • Fiber transmission distance up to 40KM .
    • DIN rail or panel mount support.
    Specifications
    • Power Input Voltage: DC +10V to +30V.
    • Interface: RS-232/422/485 auto switching.
    • RS-232: 3 full-duplex (TXD, RXD, GND).
    • RS-422: Differential 4 full-duplex wires(TX+,TX-,RX+,RX-).
    • RS-485: Differential 2 half-duplex wires(Data+,Data-).
    • Cable: Fiber cable (9/125um).
    • Wavelength: 1310(FPLD) nM.
    • Distance: Fiber up to 40KM and RS-422/485 up to 4000ft (1200M ).
    • RS-422/485 line protection: Against surge, short circuit, voltage peak.
    • Connection type: Screw terminal for maximum AWG #12~30 wires.
    • Power supply: Screw terminal, or external DC adapter.
    • Power consumption: 110mA/12V
    • Isolation Voltage: 3000V DC.
    • Operating environment: -10 to 50℃ .
    • Storage temperature: -20 to 70℃.
    • Humidity: 10~90% Non-condensing.
    • Dimension: 151mm X 75mm X 26mm .
    • Weight: 388g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    Fiber to RS232/422/485 Isolated Converter, ST/2KM

    Rated 0 out of 5
    $396.00
    Features
    • Wide range power input voltage.
    • ST Multi-mode fiber port.
    • Auto direction flow control on RS-485.
    • Automatically switch signal RS-232, RS-422 and RS-485.
    • Support 3000V DC isolation protection.
    • All RS-422/485 signals provide surge and over current protection.
    • Power/TX/RX mode LED indicator.
    • Fiber transmission distance up to 2KM .
    • Auto baud rate switching from 300bps to 115.2Kbps.
    • Support Din-Rail and panel mount.
     
    Specifications
    • Power Input Voltage: DC +10V to +30V.
    • Interface: RS-232/422/485 auto switching to Fiber (Multi-mode).
    • RS-232: 3 full-duplex (TXD, RXD, GND).
    • RS-422: Differential 4 full-duplex wires ( TX+ , RX+, TX- , and RX-).
    • RS-485: Differential 2 half-duplex wires (D+, D-).
    • Cable: Fiber ST Cable (62.5/125um).
    • Wavelength: 820 nM.
    • Distance: RS-422/485 up to 4000ft . ( 1250M ), and Fiber up to 2 KM .
    • Baud Rate: From 300bps to 115.2kbps (maximum).
    • Operating System: Windows/Linux/Unix/MAC.
    • Connection type: Screw terminal for maximum AWG 12 wire.
    • Signal LED: Power on, TX, RX.
    • Power supply: Screw terminal, or standard external DC adapter.
    • Power consumption: 1.6W.
    • Isolation Voltage: 3000V DC.
    • Operating temperature:-10 to 50℃.
    • Storage temperature: -20 to 70℃.
    • Humidity: 10-90% non-condensing.
    • Dimension: 151 mm X 75mm X 26mm .
    • Weight: 375g .
  • Quick view
    Add to cart Add to wishlist Add to compare

    4 port Modbus TCP to RTU/ASCII Gateway

    Rated 0 out of 5
    $990.00
    Features
    • Wide input range DC power supply.
    • Provide 3KV optical isolation protection.
    • Supports Ethernet Mode like TCP Server, TCP Client, and UDP.
    • Support Auto-MDIX twisted pair crossover detection and auto-correction.
    • Maximum allowed bandwidth is 460 Kbps per Serial Port.
    • Supports PPPoE , DDNS , NTP , FTP , Telnet.
    • Runs in Stand Alone Mode.
    • Built in Restore Factory default push button.
    • Auto direction RS485 flow control by hardware.
    • Power/Link and 4 pairs serial RX/TX mode LED indicator.
    • Support screw terminal and standard external DC power adaptor.
    • Panel mounts and Din-Rail Support.
     
    Specifications
    • CPU:32 bit 580MHZ with MMU.
    • Power Input Voltage: DC +9V to +24V.
    • LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
    • RS-232: TX, RX, GND.
    • RS-422: TX+, TX-, RX+, RX-.
    • RS-485: Data +, Data –.
    • Data Rate: 75~230.4Kbps.
    • Parity: none, even, odd.
    • Data Bits: 5, 6, 7 or 8.
    • Stop Bits: 1, 2.
    • Configuration through Windows Admin Utility / Web Console / Telnet Console.
    • Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet.
    • Power supply: Screw terminal, or standard external DC adapter.
    • Serial interface: +/-15 KV ESD.
    • RS422/485 interface: Surge, over current, over voltage protection.
    • Serial terminal and Ethernet with 3KV Optical Isolation.
    • Power consumption: 12V/400 mA .
    • Operating Temperature: -20 °C to 65 °C.
    • Humidity: 0~90% Non-Condensing.
    • Dimensions: 224(L)*107(W)*33(H) /mm.
    • Weight: 400g (W/Packing).
  • Quick view
    Add to cart Add to wishlist Add to compare

    4 port RS232/422/485 Serial Device Server

    Rated 0 out of 5
    $724.68
    Features
    • Wide input range DC power supply.
    • Supports Socket operation modes like TCP Server, TCP Client, and UDP using TCP/IP and UDP protocols.
    • Support Auto-MDIX twisted pair crossover detection and auto-correction.
    • Each Port maximum connection 4 host PC at TCP Server and TCP Client Mode.
    • Maximum allowed bandwidth is 230.4 Kbps per Serial Port.
    • Supports Web Console, Telnet Console.
    • Runs in Stand Alone Mode.
    • Built in Restore Factory default push button.
    • Features Accessible Imps List to add or remove “legal” remote host IP Addresses to prevent unauthorized access to Serial Server.
    • Features Auto IP Address Report to periodically report the IP Address of Serial Server to the assigned Host on Network.
    • Auto direction RS485 flow control by hardware.
    • Surge protection and over current and over voltage on RS-422/485 data lines.
    • Virtual COM drivers for WIN 32bit XP /Vista/2003Server/2008 Server (32-bit & 64-bit), 2000 Server OS, Win 7 (32-bit & 64-bit) ,Win 8/8.1 (32-bit & 64-bit).
    • Fully compatible with Ethernet and TCP/IP protocol.
    • Supports 10/100 Mbps Ethernet.
    • Power/Link and 4 pair Serial RX/TX mode LED indicator.
    • Support screw terminal and standard external DC power adaptor.
    • Panel mounts and Din-Rail support.
     
    Specifications
    • CPU:32 bit 580MHZ with MMU.
    • Power Input Voltage: DC +9V to +24V.
    • LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
    • RS-232: TX, RX, GND.
    • RS-422: TX+, TX-, RX+, RX-.
    • RS-485: Data +, Data –.
    • Data Rate: 75~230.4Kbps.
    • Parity: none, even, odd.
    • Data Bits: 5, 6, 7 or 8.
    • Stop Bits: 1, 2.
    • Configuration through Windows Admin Utility / Web Console / Telnet Console.
    • Protocol: ARP , IP , ICMP , UDP , TCP , HTTP , DHCP,PPPoE , DDNS , NTP , FTP , Telnet.
    • Power supply: Screw terminal, or standard external DC adapter.
    • Serial interface: +/-15 KV ESD.
    • RS422/485 interface: Surge, over current, over voltage protection.
    • Serial terminal and Ethernet with 3KV Optical Isolation.
    • Power consumption: 12V/400 mA .
    • Operating Temperature: -20 °C to 65 °C.
    • Humidity: 0~90% Non-Condensing.
    • Dimensions: 224(L)*107(W)*33(H) /mm.
    • Weight: 400g (W/Packing).
  • Quick view
    Add to cart Add to wishlist Add to compare

    Modbus TCP to RTU/ASCII Gateway with Watchdog

    Rated 0 out of 5
    $534.60
    Features
    • Wide input range DC power supply.
    • Built-In watchdog function prevents system boot fail.
    • Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    • Modbus Type support TCP Master to Serial Slave and TCP Slave to Serial Master.
    • Support 1 serial master  to 8 TCP slave ,each TCP slave can free set up UID from 0~256..
    • Compatible with    Modscan32 ,Modbus Poll,CAS Modbus Scanner and SCADA .. application.
    • Support virtual com maximum connection 16 client.
    • Maximum 8 sets host IP that limits network access.
    • Surge protection and over current and over voltage on RS-422/485 data lines.
    • Support baud rate from1200~921600Kbps.
    • Auto switching RS-232/422/485 signal interface.
    • Fully compatible with Ethernet and TCP/IP protocol.
    • Supports 10/100 Mbps Ethernet.
    • Power/Link/UART RX/UART TX mode LED indicator.
    • Heart Beat function ensures a reliable communicating connection.
    • Auto reconnection when power or Ethernet fail.
    • Back to factory configuration by external switch.
    • Support configuration by serial console.
    • Update the firmware from LAN.
    • Dual power input select from screw terminal or DC-Jack.
     
    Specifications
    • Power Input Voltage: DC +10V to +30V.
    • LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
    • Modbus TCP Type: TCP Master and slave.
    • Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN 8/WIN 8.1 and WIN10.
    • External touch button: Back to factory.     .
    • Power supply: Screw terminal, or DC jack.
    • Configuration mode: Trycom Device Manager, WEB settings.
    • Plug-in screw terminal wiring: Accepts AWG #12 ~30 wires.
    • Power consumption: 12V/140mA.
    • Operating Temperature: -10 to 65 °C.
    • Humidity: 0~90% Non-Condensing.
    • Dimensions: 151(L)*75(W)*26(H) mm.
    • Weight: 395g with packing.
  • Quick view
    Add to cart Add to wishlist Add to compare

    RS232/422/485 Serial Device Server with Watchdog

    Rated 0 out of 5
    $297.00
    Features
    • Wide input range DC power supply.
    • Power Input detection circuit.
    • External watchdog function prevents system or power fail.
    • Support Auto-MDIX twisted pair crossover detection and Auto-Correction.
    • Maximum Connection 16 Client PC at Server Mode.
    • Maximum 8 sets host IP that limits network access.
    • Surge protection and over current and over voltage on RS-422/485 data lines.
    • Support baud rate from1200~921600Kbps.
    • Auto switching RS-232/422/485 signal interface.
    • Virtual COM drivers for Windows 98/WIN2000/WIN XP/Vista/WIN2003/WIN 7/WIN8/WIN8.1 and WIN10.
    • Virtual Com Support Server, Client, UDP mode.
    • Fully compatible with Ethernet and TCP/IP protocol.
    • Supports 10/100 Mbps Ethernet.
    • Power/Link/RX/TX mode LED indicator.
    • Heart Beat function ensures a reliable communicating connection.
    • Auto Pair-mode when power or Ethernet fails.
    • Back to factory by external switch.
    • Support configuration by serial console.
    • Update the firmware from Lan.
    • Dual power input select from screw terminal or DC-jack.
       
    Specifications
    •  Power Input Voltage: DC +10V to +30V.
    • LAN: Auto-MDIX, 10/100 Mbps Auto-detecting.
    • RS-232: TX, RX, RTS, CTS, DTR, DSR, DCD, GND.
    • RS485 signal: differential 2 half-duplex wires (DATA+, DATA-).
    • RS422 signal: differential 4 full-duplex wires.(TX+,RX+,TX-,RX-)
    • Data Rate: 1200,2400,4800,9600,19200,38400,57600,115200,921600 K bps .
    • Parity: none, even, odd.
    • Data Bits: 5, 6, 7 or 8.
    • Stop Bits: 1, 1.5 or 2.
    • Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP
    • External switch 1,2:OFF/OFF :TCP and VSP mode.
    ON/ OFF  : Option . OFF/ON   :Option. ON/ON     :Back to Factory.
    • Virtual-Com mode support  RS232 TXD,RXD,GND, RS422 TX+,TX-,RX+, RX-RS485 DATA+,DATA-.
    • Power supply: Screw terminal or DC jack .
    • Serial interface: +/-15 KV ESD.
    • RS422/485 interface: Surge, over current, over voltage protection.
    • Power consumption: 12V/140mA.
    • Operating Temperature:-10 to 65 °C.
    • Humidity: 0~90% Non-Condensing.
    • Dimensions: 151(L)*75(W)*26(H) mm.
    • Weight: 395g with packing.