Cart (0)
Close
- Compatible for SAE J1939, CAN Open, DeviceNet, NMEA 2000
-
CL3000 CAN BUS LOGGER with Real-time Clock and WiFi (16 GB)
$877.80The CL3000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a WiFi data logger with SD card and a wired CAN interface with a real-time clock. -
CL2000 CAN BUS LOGGER with Real-time Clock (8 GB variant)
$503.80The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock. -
CL2000 CAN BUS LOGGER with Real-time Clock (32 GB variant)
$635.80The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface with real-time clock. -
CL1000 CAN BUS LOGGER (8 GB variant)
$371.80The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface. -
CL1000 CAN BUS LOGGER (32 GB variant)
$503.80The CL1000 is a simple-to-use, configurable & powerful stand-alone CAN-bus analyzer. It is both a data logger with SD card and a CAN interface. -
CANedge2 (8 GB) – 2x CAN BUS Data Logger with WiFi
$987.80The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates. -
CANedge2 (32 GB) – 2x CAN BUS Data Logger with WiFi
$1,119.80The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 32 GB industrial SD card. The small device connects via WiFi access points (e.g. WLAN or 3G/4G routers) to securely push data to your server. Further, global fleets can easily be managed via over-the-air firmware & config updates. -
CANedge1 (8 GB) – 2x CAN BUS Data Logger
$657.80The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 8 GB industrial SD card. -
CANedge1 (32 GB) – 2x CAN BUS Data Logger
$789.80The plug & play 2xCAN/LIN logger records timestamped CAN data (Classical/CAN FD) to the extractable 32 GB industrial SD card. -
Contactless reader CANCrocodile
$147.84CANCrocodile is designed for safe data reading from vehicle CAN bus. Contactless reader is used within vehicle telematics and GPS tracking systems for receiving various parameters of vehicle operation from CANbus: speed, RPM, oil pressure & temperature, fuel volume & consumption, etc. Data reading occurs without electrical connection and without damaging CAN wires. CANCrocodile works in “listen” mode only, i.e. it does not change original J1939 messages and does not send any signals to CANbus.- Nominal supply voltage: 12/24 V (5V – on request ; 2/24 A++ (low current consumption) – on request)
- Current consumption: 300mA for “5V” version; 30/15mA for “12/24V” version; 10/5mA for “12/24 A++” version
- Cable length- 0.7m (2 m– on request)
- Cable connector- Molex/bare wires/Special connector (specify when ordering)
-
ESX IOXp (Programmable Controller, Mobile, 5V ext., 4x PWM/ DOUT, 4x PVG Output, 2x CAN)
$872.00ESX IOXp 51490
- 16 bit XC2287 Micro-controller
- 2 CAN interfaces, 1x Serial
- Maximum 26 I/O's
- 4x PWM/ DOUT, 4x PVG Outputs
- 4xCurrent inputs, 10xVoltage inputs, 1xDigital input, 3xFrequency inputs
- 5V external power supply
-
USB to CAN Interface (sub-D9, galvanic isolation)
$211.20TouCAN incorporates zero frame-loss functionality even when delivering data at 1Mbit/s speed. Device contains a data buffer for 20000 frames, which ensures a back-up if connectivity loss is experienced. The USB to CAN bus converter flawlessly works on windows version 32bit & 64bit, device supports extended Microsoft descriptors specification. Device also supports Linux SocketCAN. Usually Ex stock. Price includes GST and local delivery!
