Cart (0)
Close
-
Anybus Communicator CAN Modbus RTU
$1,074.00The chosen interfaces within this Anybus gateway are:- CAN-based
- Modbus RTU Slave
-
CANcheck Installation tester for CAN networks
$2,930.40CANcheck: Â Installation tester for CAN networks CANcheck allows users to analyse CAN networks during commissioning, maintenance and helps searching faults. This battery-operated, hand-held device connects to the CAN network to be tested and operates using a clearly-structured menu. Available in stock. -
iPC-I 165/ISA
$1,320.00iPC-I 165, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPCI 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller. -
iPC-I 320/PCI II
$1,100.00iPC-I 320/104; one CAN channel with galvanic isolation This active CAN board with one por two CAN channels is appropriate for use in a wide variety of CAN applications. Filtering, pre-processing, transmission and time stamped storage of the CAN messages are just some of the features offered by the on-board micro-controller. In combination with the universal CAN driver (VCI), the iPC-I 320/PCI II allows an easy integration of PC supported CAN applications. Offering an exceptional combination of functionality and value, it is perfectly suited for high-volume productions. In addition, the iPC-I 320/PCI II is also well-suited for use with the IXXAT analysis and configuration tools. -
CAN@net NT 420 – CAN Ethernet Gateway
$1,438.80IXXAT CAN@net NT 420 is a CAN-Ethernet gateway, bridge and PC interface with Up to 4 x CAN of which 2 x CAN FD CAN@net NT 420 offer three operation modes and can be used as a PC interface as bridge and gateway. This product may take upto 2 to 3 weeks for delivery. -
CAN@net NT 200 – CAN Ethernet Gateway
$963.60IXXAT CAN@net NT 200 is a CAN-Ethernet gateway, bridge and PC interface CAN@net NT 200 comes with 2 classic CAN channels It offers three operation modes and can be used as a PC interface as bridge and gateway. . Ex stock, if sold out 3 weeks from order. (This product replaces CAN@NetII Generic which is being phased out) -
CANbridge NT 420 – 4 CAN (2 CAN FD)
$1,278.00Configurable CAN-to-CAN Bridge/Router with CAN FD Support CANbridge NT 420 comes with 4 classic CAN channels of which 2 can be configured as CAN FD channels . Enclosure suitable for DIN Rail mounting. This product may take upto 2 to 3 weeks for delivery. -
USB-to-CAN V2 automotive
$1,698.00IXXAT USB to CAN V2 professional, 1 x CAN interface High-Speed and 1 x CAN Low Speed and 1 x LIN (software switchable) with Galvanic Isolation (with 2 x RJ45) -
USB-to-CAN V2 compact (RJ45)
$699.60IXXAT USB to CAN interface (Compact) with 1x High speed CAN interface, RJ45 version V2 with galvanic isolation. -
CANio500
$987.04The CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles. CANio 500 is a field attachable CAN/ CANOpen I/O device available in multiple configurations as below:- Suitable for CANopen and CAN layer 2 networks
- 4 digital inputs + clamp 15 (between 0 ... 34 V, threshold at 50 %)
- 4 digital outputs, max. 1 A, output voltage free selectable
- 4 analog inputs, 12 bit res. (0 -Â +10V)
- 4 analog outputs, 12 bit res. (+/- 5 V, or +/- 10 V, or 0-5 V, or 0-10 V, switchable via software)
- Universal use due to robust design and wide power supply range
- Easy configuration and versatile configuration options
- Adaptation to specific requirements via CANio ADK
- Plug-in version available for direct integration into customer hardware
-
CAN-IB400/PCI
$713.00Active CAN Interface for PCI 1 x CAN (High-Speed) With the CAN-IB400/PCI HMS offers an PCI interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as CAN (ISO 11898-2). Features and benefits- Active PCI board with 32 bit microcontroller
- Easy expandable via field bus expansion and expansion board
- One CAN channel (High-Speed)
- Galvanic isolation of the CAN interface
- Uniform driver packages support all IXXAT CAN and CAN-FD interfaces and allow easy change of the PC interface type
- Powerful programming interface for Windows "VCI" as well as "ECI" for Linux, QNX, RTX, INtime and VxWorks
-
USB-to-CAN V2 professional
$1,290.00IXXAT USB to CAN V2 professional, 2 x CAN interface High-Speed with Galvanic Isolation (with 2 x RJ45) USB to CAN V2 professional is the recommended IXXAT CAN Interface by MTU for DiaSys.  DiaSys is a Windows®-based software tool that helps technicians communicates with a wide range of MTU engine controllers. DiaSys allows the user to perform required maintenance and servicing tasks, including reading and recording measurement values/process variables.
