Cart (0)
Close
-
PCAN-USB, CAN interface for USB
$456.50Part no: IPEH-002021 USB-CAN programming interface for Codesys and Opensyde. Recommended USB-CAN programming interface for STW controllers. -
USB to CAN Interface (sub-D9, galvanic isolation)
$211.20TouCAN incorporates zero frame-loss functionality even when delivering data at 1Mbit/s speed. Device contains a data buffer for 20000 frames, which ensures a back-up if connectivity loss is experienced. The USB to CAN bus converter flawlessly works on windows version 32bit & 64bit, device supports extended Microsoft descriptors specification. Device also supports Linux SocketCAN. Usually Ex stock. Price includes GST and local delivery! -
Kvaser BlackBird v2
$2,118.60Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. To learn more about the product check the youtube link. -
iPC-I 165/ISA
$1,320.00iPC-I 165, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPCI 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller. -
iPC-I 320/PCI II
$1,100.00iPC-I 320/104; one CAN channel with galvanic isolation This active CAN board with one por two CAN channels is appropriate for use in a wide variety of CAN applications. Filtering, pre-processing, transmission and time stamped storage of the CAN messages are just some of the features offered by the on-board micro-controller. In combination with the universal CAN driver (VCI), the iPC-I 320/PCI II allows an easy integration of PC supported CAN applications. Offering an exceptional combination of functionality and value, it is perfectly suited for high-volume productions. In addition, the iPC-I 320/PCI II is also well-suited for use with the IXXAT analysis and configuration tools. -
USB-to-CAN V2 automotive
$1,698.00IXXAT USB to CAN V2 professional, 1 x CAN interface High-Speed and 1 x CAN Low Speed and 1 x LIN (software switchable) with Galvanic Isolation (with 2 x RJ45) -
USB-to-CAN V2 compact (RJ45)
$699.60IXXAT USB to CAN interface (Compact) with 1x High speed CAN interface, RJ45 version V2 with galvanic isolation. -
Kvaser Air Bridge Light HS
$1,829.52Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN. There are two versions: (00808-3) Kvaser Air Bridge Light HS is approved for the European Union, while (01008-6) Kvaser Air Bridge Light HS (FCC) complies with US certification. Both share the same functionality but have different radio transmission schemes due to regulatory differences. -
Kvaser Mini PCI Express HS
$729.96The Kvaser Mini PCI Express HS is a highly-integrated CAN (controller area network) add-on board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability. The add on board offers a single channel, high speed CAN interface with error frame detection and on-board buffer. This board has a low profile connector that complies with the mini PCI Express standard, which connects via a cable to a DSUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected because all the electronics remain inside the computer housing. To learn more about the product, view the youtube link -
Kvaser Leaf Light HS v2, M12 ,USB to CAN Interface
$600.60The Kvaser Leaf Light HS v2 M12 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and M12 connector, the Leaf Light HS v2 M12's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard. To know more about the product check the youtube link. -
Kvaser Leaf Pro HS v2, USB to CAN Interface
$1,115.00Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin DSUB, bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details. -
Kvaser Memorator Pro 2xHS v2 Data logger
$2,467.08Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB2.0, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant. Youtube Link for learning more about Kvaser Memorator Pro
